Jump to content

  • Quick Navigation
Photo

Cleaning-In-Place

Share this

  • You cannot start a new topic
  • Please log in to reply
2 replies to this topic

guciuu

    Grade - Active

  • IFSQN Active
  • 1 posts
  • 0 thanks
0
Neutral

  • Poland
    Poland

Posted 23 May 2011 - 12:53 PM

Hi.
In the factory, machines are equipped in sieves that often clog and need to cleaned. Operators always put the dirty sieves on the ground. Do you think that:
I solution
The best solution would be to make two hooks on the wall that they will be always hanging on the wall even when they are dirty.
II solution
Each time the operator should take dirty sieve, go to a special room where he will wash the sieve then return and hang clean one on the wall.

Or is it possible to clean sieves in the same place in the distance form active line and then hang clean on the wall?
Thanks


Simon

    IFSQN...it's My Life

  • IFSQN Admin
  • 12,826 posts
  • 1363 thanks
880
Excellent

  • United Kingdom
    United Kingdom
  • Gender:Male
  • Location:Manchester
  • Interests:Married to Michelle, Father of three boys (Oliver, Jacob and Louis). I enjoy cycling, walking and travelling, watching sport, especially football and Manchester United. Oh and I love food and beer and wine.

Posted 26 May 2011 - 09:09 PM

From an efficiency point of view I would favour cleaning in place if it can be done effectively and safely. I'm sure it can be done with the right tools and equipment. What are you cleaning?


Get FREE bitesize education with IFSQN webinar recordings.
 
Download this handy excel for desktop access to over 180 Food Safety Friday's webinar recordings.
https://www.ifsqn.com/fsf/Free%20Food%20Safety%20Videos.xlsx

 
Check out IFSQN’s extensive library of FREE food safety videos
https://www.ifsqn.com/food_safety_videos.html


Tony-C

    Grade - FIFSQN

  • IFSQN Fellow
  • 4,223 posts
  • 1288 thanks
608
Excellent

  • United Kingdom
    United Kingdom
  • Gender:Male
  • Location:World
  • Interests:My main interests are sports particularly football, pool, scuba diving, skiing and ten pin bowling.

Posted 20 June 2011 - 02:59 AM

Hi.
In the factory, machines are equipped in sieves that often clog and need to cleaned. Operators always put the dirty sieves on the ground. Do you think that:
I solution
The best solution would be to make two hooks on the wall that they will be always hanging on the wall even when they are dirty.
II solution
Each time the operator should take dirty sieve, go to a special room where he will wash the sieve then return and hang clean one on the wall.

Or is it possible to clean sieves in the same place in the distance form active line and then hang clean on the wall?
Thanks


I would use a bath to clean them in then leave them soaking in a sanitiser. It would be better if you have a spare so you can swap them over and there is not so much rush in cleaning them and putting them back if it clogs during production.

Regards,

Tony




Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users