Jump to content

  • Quick Navigation
Photo

Raw Material and Ingredient Specification Categorization

Share this

  • You cannot start a new topic
  • Please log in to reply
14 replies to this topic

Josephine

    Grade - Active

  • IFSQN Active
  • 5 posts
  • 1 thanks
0
Neutral

  • Malaysia
    Malaysia

Posted 08 March 2013 - 04:35 AM

Hi All,
I hope someone can help me on this. The Catering that I'm working on is going for HACCP certification. I understand that I need to prepare the raw material and ingredient spec/description before proceed to HACCP analysis for raw material. The problem I'm facing now is developing the spec/description coz we use variety of items such as meat, seafood, fruits, vegetables, spices, canned food, pickle vegetable, etc, etc. Do I need to do ALL or categorized? How can I categorized? Would very much appreciate if someone can share their knowledge and experiences.

Thank you in advance.
Josephine



Thanked by 1 Member:

SBNavarro

    Grade - Active

  • Newbie
  • 8 posts
  • 0 thanks
0
Neutral

  • Philippines
    Philippines

Posted 08 March 2013 - 09:17 AM

We did it ONE BY ONE in our company. And it will help you be more familiar with the raw materials that you are using which is good especially in the hazard analysis and risk assessment part. If you clearly know what your raw materials are, then you know which hazard will occur significantly (knowing that you too are aware of the process controls and its effects on food, as well as external factors that can cause cross contamination). Also, check Codex, we used them and it helped us a lot.

http://www.fao.org/docrep/005/Y1579E/y1579e03.htm

:)

I hope this can somehow help! :)

Goodluck!



Thanked by 1 Member:

williamw

    Grade - AIFSQN

  • IFSQN Associate
  • 36 posts
  • 33 thanks
4
Neutral

  • United States
    United States

Posted 08 March 2013 - 06:01 PM

Rather than writing your own specifications you can get specifications from your vendors, review those, and adopt them. You will need to make sure you have a control in place that requires vendors to notify you before changing specifications on a material, but that can be a lot less time consuming than trying to write your own specs for each item and still give you the information that you need.



MQA

    Grade - MIFSQN

  • IFSQN Member
  • 224 posts
  • 132 thanks
19
Good

  • Australia
    Australia
  • Gender:Not Telling
  • Location:Melbourne
  • Interests:Good food, excellent coffee, home sweet home, cherished friendships, valued work, and a fantastic city.

Posted 08 March 2013 - 08:30 PM

Oops, didn't mean to "thank" - meant to "reply"!

You’re referring to your supplier’s raw materials, yes? So you need to ensure you have an “Approved Supplier Program” in place.

Not only do you require product specifications from your suppliers but also their food safety certification.

You are in the catering industry: yes, there would be a lot of specifications that you must gather. But if your suppliers are practicing food safety and are certified, they would already have these product specifications in place and it should be as easy as an email or fax to your company.

Bad news is, quite often many of the suppliers don’t practice food safety and you will struggle getting some of these specifications. If this is the case, you have two options: [1] change suppliers; [2] develop the specifications yourself with your supplier’s approval (to ensure the data is accurate).

You can’t categorise your supplier’s product specifications. Each ingredient you use is different. Safety criteria for one spec might differ from another. For example, nuts that you purchase from one country might have a higher microbiological risk than nuts purchased from another country.

On top of your certifications and product specifications, you may need to also ensure you receive Certificates of Analysis for your high risk ingredients, such as egg pulp.

So in summary, you must ensure you have the following documentation from your suppliers:

  • Food safety certification
  • Product specifications for all raw ingredients
  • Certificates of analysis for high risk raw ingredients

Welcome to the world of food safety. It will drive you crazy initially and overwhelm you but I promise you it gets better and is worth all the initial stress.


... helping you achieve food safety & quality assurance...

Melbourne Quality Assurance | Australia
www.melbourneqa.com | janette@melbourneqa.com
Facebook | Twitter


Thanked by 2 Members:

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 08 March 2013 - 11:54 PM

Dear Josephine,

You may find this post (and thread) of interest -

http://www.ifsqn.com...dpost__p__59495

Rgds / Charles.C


Kind Regards,

 

Charles.C


Thanked by 1 Member:

Josephine

    Grade - Active

  • IFSQN Active
  • 5 posts
  • 1 thanks
0
Neutral

  • Malaysia
    Malaysia

Posted 11 March 2013 - 02:58 AM

Dear Josephine,

You may find this post (and thread) of interest -

http://www.ifsqn.com...dpost__p__59495

Rgds / Charles.C



Josephine

    Grade - Active

  • IFSQN Active
  • 5 posts
  • 1 thanks
0
Neutral

  • Malaysia
    Malaysia

Posted 11 March 2013 - 03:19 AM

Dear Sheena, William, JAKMQA and charles,
Thank you ALL for your infor. :thumbup: It was a great help.



George @ Safefood 360°

    Grade - SIFSQN

  • Corporate Sponsor
  • 374 posts
  • 326 thanks
31
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Ireland and USA

Posted 11 March 2013 - 03:07 PM

Hi Josephine,


I don't want to add much to what has already been said in the previous posts, however it is important to understand that under HACCP the raw material specifications and the product description are different things and do different jobs.


As already stated, you should hold a copy of the specification for each individual ingredient or raw material purchased by the catering facility. These are essential to know and agree on exactly what you are buying. They will provide you with valuable information on the composition, hazards, allergens, storage conditions, identification, source etc. You will typically obtain these from the supplier.


The product description in HACCP focuses on the final products / dishes that you produce/prepare in the catering facility. These are the final products which have undergone all the steps in your process and are presented for consumption. These descriptions are intended to 'set the scene' for your subsequent hazard analysis and risk assessment. They cover the name and description of the product, ingredients, intrinsic and extrinsic factors contributing to the safety of the food product, storage conditions, shelf life, use and misuse of the product. Again as stated these should be developed for each food product produced and are an excellent way for you to get to know your products in detail. They are typically developed by you or your HACCP team.


George


Thanked by 2 Members:

bill1952

    Grade - Active

  • IFSQN Associate
  • 10 posts
  • 1 thanks
0
Neutral

  • United States
    United States

Posted 13 March 2013 - 12:19 PM

www.fda.gov/food/foodsafety/retailfoodprotection/foodcode

In the US we have this book, FOOD CODE 2009. It is a good tool to assit you in your new venture. It is inexpensive and can be ordered from the internet.
Seafood HACCP is more critical and demanding than FDA( fruits, vegetables and prepared meals) or USDA (meat and dairy)
Don't forget about packaging material that comes in contact with food.
Country of origin is important to know for food sourced and issues in other lands. Watch the storage of allergen and sensitivity like items.
Good luck in your new venture and any questions I can help with contact me.
I was an auditor, canning owner and production operator and a director of quality in my years in the food industry.

Bill1952


Josephine

    Grade - Active

  • IFSQN Active
  • 5 posts
  • 1 thanks
0
Neutral

  • Malaysia
    Malaysia

Posted 18 March 2013 - 04:57 AM

Hi All, :helpplease:
After establishing the Raw Material and ingredient spec, the next step is to establish the Hazard Analysis for all the raw mat' and ingredients (microbiological, chemical, physical and Allergen). Wonder anyone can help me to Hazard analysis for vegetable and Poultry. What are hazards might present and the control measures.

Thank you.



trubertq

    Grade - PIFSQN

  • IFSQN Principal
  • 658 posts
  • 281 thanks
137
Excellent

  • Ireland
    Ireland
  • Gender:Female
  • Location:Donegal

Posted 18 March 2013 - 07:07 PM

Hi All, :helpplease:
After establishing the Raw Material and ingredient spec, the next step is to establish the Hazard Analysis for all the raw mat' and ingredients (microbiological, chemical, physical and Allergen). Wonder anyone can help me to Hazard analysis for vegetable and Poultry. What are hazards might present and the control measures.

Thank you.


You've just listed the hazards above :rolleyes:

Microbiological
Chemical
Physical
Allergen

You could also have:

Risk of deliberate adulteration ( by employee or visitor). I'm sure there are more depending on the area you are working in, those are the ones I am familiar with.

Make a matrix of these for each step of your process and then figure out what is the probability of these hazards arising and what you can do to control the hazard.

It'll take a bit of time in at the start but once you have a few steps done it's a cut and paste job.


I would post an example but I am afraid of ridicule by Charles and Co., , who don't seem to approve of my interpretation of HACCP :dunno:

Edited by trubertq, 18 March 2013 - 07:08 PM.

I'm entitled to my opinion, even a stopped clock is right twice a day

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 19 March 2013 - 06:36 PM

Hi All, :helpplease:
After establishing the Raw Material and ingredient spec, the next step is to establish the Hazard Analysis for all the raw mat' and ingredients (microbiological, chemical, physical and Allergen). Wonder anyone can help me to Hazard analysis for vegetable and Poultry. What are hazards might present and the control measures.

Thank you.

Dear Josephine,

The attachment below includes a fairly detailed list of (haccp) microbial pathogens for tomato (mixture of genera and species).
Attached File  Generic HACCP Plan Tomato.pdf   451.64KB   172 downloads
(Some users would handle parts of the HACCP content within a GAP scheme)

@trubertq. No idea what you mean by "ridicule" but I regret that you are obviously feeling so insecure.

I think it is apparent that all inputs to this forum are warmly welcomed. It is surely not unusual that forum discussions contain both agreement and disagreement. Preferably constructive and amicable.

Rgds / Charles.C

Kind Regards,

 

Charles.C


SBNavarro

    Grade - Active

  • Newbie
  • 8 posts
  • 0 thanks
0
Neutral

  • Philippines
    Philippines

Posted 22 March 2013 - 06:16 AM

Dear Josephine,

I think, you need to specify the vegetable (kind, fresh, processed, canned, low-acid, in brine, etc) that you will be using. Like what Charles have given for tomato. Also, like what was discussed by bill1952 above, you should note the country of origin, as this is important for you to determine the likely occurrence of a particular hazard (for eg, previous break outs of e.coli / salmonella in a particular area).

You need to be specific for after hazard identification and risk assessment you will then be providing ways to reduce the occurence/number of these hazards, and this is hazard-specific (i guess? :smile: ). If it is biological, what kind? pathogenic bacteria, yeast or mold or pests (and so on), after which, how are you going to reduce this? preventive measures? If chemical, is it pesticide residues, toxins?

Read and read and read! It will help a lot. :thumbup:

For biological hazards reference, try looking for Bad Bug Book, also, do not forget books like, Microbiology of Safe Foods and Modern Food Microbiology and search for more! (but do not forget to read the news/updates about the latest topic on food pathogens and contaminants)

Goodluck! :biggrin:



Thanked by 2 Members:

BlueSoulMate

    Grade - Active

  • IFSQN Active
  • 6 posts
  • 1 thanks
0
Neutral

  • Turkey
    Turkey
  • Gender:Female

Posted 22 March 2013 - 08:55 AM

Hi,
I think Categorization of raw material, semi product is not a good solution, if you start with it somewhile you should rearrange somehow.
You should do it in individually.
Regards,



MQA

    Grade - MIFSQN

  • IFSQN Member
  • 224 posts
  • 132 thanks
19
Good

  • Australia
    Australia
  • Gender:Not Telling
  • Location:Melbourne
  • Interests:Good food, excellent coffee, home sweet home, cherished friendships, valued work, and a fantastic city.

Posted 25 March 2013 - 07:25 PM

@ sheena: you're on the ball. Sometimes it feels it's all about read, read, read, research, research, research, google, google, google. Oh, and obtaining HACCP certified training.

For further information, also check out:


Other resources that may come in handy:

Attached Files



... helping you achieve food safety & quality assurance...

Melbourne Quality Assurance | Australia
www.melbourneqa.com | janette@melbourneqa.com
Facebook | Twitter


Thanked by 2 Members:


Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users