Jump to content

  • Quick Navigation
Photo

Is there a requirement for backflow preventers in dairy?

Share this

  • You cannot start a new topic
  • Please log in to reply
8 replies to this topic
- - - - -

srg227

    Grade - Active

  • IFSQN Active
  • 4 posts
  • 0 thanks
0
Neutral

  • Earth
    Earth

Posted 19 September 2014 - 07:47 PM

We are constructing a new facility and the site manager wants to install backflow preventers (Watts 9D) on all of our water lines. Each device is $120 a piece and we are already over budget. My Vice President asked me if there is a requirement for these devices anywhere in the any of the required regulatory agencies for the dairy processing sector. Does anyone have any recommendations?

 



Setanta

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,599 posts
  • 369 thanks
383
Excellent

  • United States
    United States
  • Gender:Female
  • Interests:Reading: historical fiction, fantasy, Sci-Fi
    Movies
    Gardening
    Birding

Posted 19 September 2014 - 08:03 PM

Hello and welcome to the Forum! :welcome:

 

It would be beneficial to know what Standard you might be audited against and what country you are in.  The rules and regulations vary widely, I imagine!

 

Thanks! 


-Setanta         

 

 

 


srg227

    Grade - Active

  • IFSQN Active
  • 4 posts
  • 0 thanks
0
Neutral

  • Earth
    Earth

Posted 19 September 2014 - 08:08 PM

Sorry, We fall under SQF Edition Level 2, modules 2, 11.



srg227

    Grade - Active

  • IFSQN Active
  • 4 posts
  • 0 thanks
0
Neutral

  • Earth
    Earth

Posted 19 September 2014 - 08:09 PM

Edition 7.2*



Setanta

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,599 posts
  • 369 thanks
383
Excellent

  • United States
    United States
  • Gender:Female
  • Interests:Reading: historical fiction, fantasy, Sci-Fi
    Movies
    Gardening
    Birding

Posted 19 September 2014 - 08:16 PM

Although I am not familiar with Dairy, I am going to say yes, you do need them since we are also SQF Level II, using modules 2 and 11 and need annual certification of our back flow preventers.  We have 6 on our small to medium sized site. Hopefully, things aren't as tight financially as that.

 

Good luck!


-Setanta         

 

 

 


srg227

    Grade - Active

  • IFSQN Active
  • 4 posts
  • 0 thanks
0
Neutral

  • Earth
    Earth

Posted 19 September 2014 - 08:35 PM

Our current facility has 12 water spigots used for cleaning throughout the facility. The Watts 9D is a smaller ¾ inch device that would be attached to each individual hose line. Currently some lines have it and some do not. The main line that connects the facility to public water supply has a backflow preventer device installed and is monitored.  Now if the facility is protected is it necessary for each line to have a backflow device as well? Hope that explains it a little bit better. I guess I’m failing to see the necessity for it if the main water line coming into the facility protected. I’m going to look in the Pasteurized Milk Ordinance.



Snookie

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,625 posts
  • 267 thanks
174
Excellent

  • United States
    United States
  • Gender:Female

Posted 19 September 2014 - 09:28 PM

First, Welcome!

 

Not an expert, but my experience is that is based on the design of your plumbing system.  You may need a plumbing expert to tell you how many you actually need.  Which is actually not a bad idea as they will be able to explain the why's so you can defend the actual number installed.  Your location may determine how many you need as well as regulations will vary. 


Edited by Snookie, 19 September 2014 - 09:28 PM.

Posted Image
Live Long & Prosper

ronrico145

    Grade - Active

  • IFSQN Associate
  • 13 posts
  • 7 thanks
2
Neutral

  • United States
    United States
  • Gender:Male
  • Location:Texas

Posted 19 September 2014 - 10:14 PM

Are you in the US?

 

Are you Grade A?

 

SQF 7.2 isnt where you should start. You need to start with Federal regulations found in the PMO if you are in the US. This is your bible... http://www.fda.gov/d...n/UCM209789.pdf



ronrico145

    Grade - Active

  • IFSQN Associate
  • 13 posts
  • 7 thanks
2
Neutral

  • United States
    United States
  • Gender:Male
  • Location:Texas

Posted 19 September 2014 - 10:18 PM

whoops... didnt read all the replies. youre on the right track, but it's in there somewhere





Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users