Jump to content

  • Quick Navigation
Photo

Fry Step Validation ''Kill step''.

Share this

  • You cannot start a new topic
  • Please log in to reply
5 replies to this topic

mambo

    Grade - Active

  • IFSQN Active
  • 23 posts
  • 11 thanks
5
Neutral

  • Earth
    Earth

Posted 12 February 2016 - 02:09 AM

Colleagues,

 

Seeking advice on validation of a frying process. We deal in fried products. Basically, thin chips made from dough (flour, eggs, palm oil & other ingredients) are fried at temperatures above 325 degrees F for 2-3 minutes. Internal temperature readings are usually 215 degrees F and water activity less than 0.5. We annually send samples to an independent Lab for APC analysis and the results are always great.

 

A potential big customer wants us to validate the fry step. We use it as a CCP. We monitor Oil temperature (> 325 F) and dwell time (2-3 minutes). Speed of conveyor belt determines the time the product spends within the oil.

 

How would you design an experiment to validate this step?  Please, anybody with links to scientific literature linking product internal temperature, low water activity to reduced microbial loads in fried products?

 

Experimental design thoughts: Different sizes of chips, different frying temperature & time combinations. Get results for internal temp, water activity and microbiological analysis.

 

Thank you.

Mambo



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 12 February 2016 - 06:08 AM

Hi mambo,

 

The question is - Validate the step for what ?  BCPA ? 

 

If so, a risk assessment is required.

 

If so, a specific product / process is required.

 

For example, the (core) T vs t data you measure will certainly eliminate all vegetative micro-organisms unless the "other ingredients" are something unusual. Some spores are maybe not eliminated.

Chemical contaminants / allergens may be unaffected.

Stones will certainly be unaffected.

 

In the context of shapes/sizes, the usual procedure is to select the slowest heating item, ie worst case scenario.


Kind Regards,

 

Charles.C


Thanked by 1 Member:

mambo

    Grade - Active

  • IFSQN Active
  • 23 posts
  • 11 thanks
5
Neutral

  • Earth
    Earth

Posted 12 February 2016 - 02:49 PM

Hi Charles C,

Thank you. You're always helpful on the forum. You deserve an award.

 

Basically, the validation would be concerned with Food Safety (Microbiological). We have a comprehensive program which comfortably marshals the Chemical and Physical hazards.. The chips are fried in palm oil at T > 325 degrees F for 2-3 minutes using an industrial conveyor belt fryer. 40 years in business, zero food safety incident. APC counts on samples are always less than 50 cfu/g. Customer is insisting on a validation study!! :helpplease:  :helpplease:



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 12 February 2016 - 05:43 PM

Hi mambo,

 

Thks yr kind words.

 

The (2015) article (1st URL below)  illustrates some  reasons why micro. validation of the frying stage / connected process steps may now be being focused on by customers. Looks like baking may have been/be in an analogous situation also (see 2nd (2010) URL). This is in some contrast to these extracts from a 2001 document –

 

Attached File  frying.png   133.11KB   0 downloads

 

http://www.foodsafet...re-snack-foods/

 

http://www.bakingbus...cade.aspx?cck=1

 

This (2014) link indicates a typical (baking) validation procedure –

http://www.snackandb...step-validation

 

This (2014) attachment illustrates aspects of the almond nut validation procedure –

Attached File  validation - pathogen - reduction steps.pdf   3.54MB   255 downloads

 

The difficulty is that (unlike, say, poultry cooking) there do not yet seem to be any accepted, safe,  general critical limits for yr  type of product for oil frying processes  although I noted this (nut-only?) comment  in 1st link –

 

If one looks at the processes currently used in the industry—frying, baking, continuous oven cooking and dry roasting—it is probably safe to say that if a company is frying or oil-roasting their products, they are safe. The Almond Board’s “Guidelines for Oil Roasting” are 260 °F for 2 minutes. Most oil-roasting or frying operations use considerably higher temperatures that will enhance lethality.

 

Yr product/process may have been studied / characterized / validated already but I couldn’t find a specific reference. You may need to do a little digging/consulting unless you have technical support readily available.


Kind Regards,

 

Charles.C


mambo

    Grade - Active

  • IFSQN Active
  • 23 posts
  • 11 thanks
5
Neutral

  • Earth
    Earth

Posted 12 February 2016 - 09:31 PM

Thank you Charles. C

 

The links were helpful. Under normal circumstances, i wonder if any common pathogens of public health concern like Salmonella, e-coli, listeria spp would survive a frying operation where the internal product temperatures reach 215 degrees F? FDA guidance on pathogen growth lists 131 degrees F as maximum temp for growth of most of the Pathogens.

 

Came across a nice validation study for the Baking Industry

 

http://www.snackandb...-baking-process

 

 

Cheers,

Mambo 



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 12 February 2016 - 11:42 PM

Thank you Charles. C

 

The links were helpful. Under normal circumstances, i wonder if any common pathogens of public health concern like Salmonella, e-coli, listeria spp would survive a frying operation where the internal product temperatures reach 215 degrees F? FDA guidance on pathogen growth lists 131 degrees F as maximum temp for growth of most of the Pathogens.

 

Came across a nice validation study for the Baking Industry

 

http://www.snackandb...-baking-process

 

 

Cheers,

Mambo 

 

Hi mambo,

 

The curious aspect of the baking document (and 1st link in my previous post) is that there is no mention of spores. It is well-established that certain pathogenic Bacillus species may survive some baking processes in this way. One control measure is via the input material meeting appropriate micro.specifications.

 

For example, the data (Dvalues for vegetative / spore forms) in post below (see pic.) suggest that a 1log reduction of B.cereus spores in rice  requires ca. 30 mins at 100degC, ie 2hrs for 4log reduction.

http://www.ifsqn.com...ion/#entry58869

 

From the D-values shown in above post, Salmonella is clearly relatively easy to eliminate for the (unspecified) food matrixes/Salmonella Species.

 

However for the table of "Resistant" Salmonella species in certain Food matrixes as shown below, the conclusion is quite different.

Attached File  Salmonella D-values.pdf   96.23KB   136 downloads

 

Another imprtant aspect is that some pathogenic vegetative species are "potent" at very low levels in the Food, ie growth is not necessary to create an unsafe product. E.coli O157 is the classic example but certain Salmonella species also meet this requirement.

 

So the answer to the query in yr previous post is "It all depends".


Kind Regards,

 

Charles.C




Share this


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users