Jump to content

  • Quick Navigation
Photo

Deep cleaning of large slat conveyor belts (NPC)

Share this

  • You cannot start a new topic
  • Please log in to reply
2 replies to this topic

FurFarmandFork

    Food Safety Consultant, Production Supervisor

  • IFSQN Fellow
  • 1,264 posts
  • 590 thanks
206
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Oregon, USA

Posted 10 February 2017 - 04:52 PM

Hi everyone,

 

Curious what other plants might be doing. At our bottling facility we use slat-style conveyor belts to move around closed, sealed, products. So in general other than cleaning the contact side of the slats regularly to prevent buildup, we don't have a super defined sanitation program for these like we would a DPC surface.

 

Does anyone else use these, and do you have a "deep cleaning" procedure or interval where you remove the belt and clean the excess grease/dust from the rollers and underside of the slats? I'm looking at this as a preventative maintenance opportunity/environmental control but at the same time the impact is pretty huge to remove and replace 200 yards of conveyor, and I imagine the nooks and cranny's underneath would need a toothbrush or hot pressure washer to get properly cleaned.

 

Let me know how you handle difficult conveyors or NPC conveying systems!

 

 


Austin Bouck
Owner/Consultant at Fur, Farm, and Fork.
Consulting for companies needing effective, lean food safety systems and solutions.

Subscribe to the blog at furfarmandfork.com for food safety research, insights, and analysis.

Tony-C

    Grade - FIFSQN

  • IFSQN Fellow
  • 4,223 posts
  • 1288 thanks
608
Excellent

  • United Kingdom
    United Kingdom
  • Gender:Male
  • Location:World
  • Interests:My main interests are sports particularly football, pool, scuba diving, skiing and ten pin bowling.

Posted 12 February 2017 - 12:20 PM

Hi Earth2O,

 

Slat conveyor cleaning can be a bit of a nightmare. I've been at sites where the conveyors are split and cleaned periodically (as you say). To reduce the frequency of splitting conveyors, I've seen conveyors constructed with regular access holes so that they can be foamed internally from a lance and then rinsed (clearly some interlocks and precautions are required for this from a H&S perspective).

 

I've previously developed internal cleaning systems with spray nozzles inside the conveyors and an automated CIP although this was not a particularly cheap option. The extent and frequency of the need for cleaning/CIP will depend on your products, spillages and amount of build up.

 

I don't encourage the use of high pressure hoses unless used away from the production environment.

 

Kind regards,

 

Tony

 

 



Thanked by 1 Member:

chris777

    Grade - Active

  • IFSQN Active
  • 1 posts
  • 0 thanks
0
Neutral

  • United States
    United States

Posted 06 June 2017 - 04:35 PM

when possible,remove belts and place in cop tanks.I originally used chlroninated products but I noticed some unwanted oxidation from maintenance not rinsing belts correctly and switched to acid.Keeps belts white.dont overheat though





Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users