Jump to content

  • Quick Navigation
Photo
- - - - -

QC on Packaging (Totes and Bags)

Packaging QC Check sampling

  • You cannot start a new topic
  • Please log in to reply
2 replies to this topic

#1 Martins

Martins

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 0 thanks
0
Neutral

  • Australia
    Australia

Posted 03 October 2017 - 09:07 PM

Hello all,

 

Trying to find a sampling plan for the QC check on the receiving of packaging material such as totes/bags. (For example how much should I inspect when receiving 5,000 totes or so on...)

Can someone share what is commonly used as a sampling plan for packaging material?

 

Thank you! :)


  • 0

#2 lkolothas

lkolothas

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 1 thanks
0
Neutral

  • Greece
    Greece

Posted 05 October 2017 - 10:29 AM

Hi Martins,

 

Hope these files are helpfull for you.  

 

Lefteris

Attached Files


  • 0

Thanked by 1 Member:

#3 Ryan M.

Ryan M.

    Grade - SIFSQN

  • IFSQN Senior
  • 394 posts
  • 162 thanks
28
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Los Angeles, California
  • Interests:Reading, crosswords, passionate discussions, laughing at US politics.

Posted 07 October 2017 - 07:08 PM

Sampling plan would be more dictated by the risk you have with the packaging materials.  Such as how many out of a given lot are defective or not usable, or do not pass your tests?  This can give you some initial guidance on the sampling plan.


  • 0





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users