Jump to content

  • Quick Navigation
Photo

Retention samples: how to determine quantity?

Share this

  • You cannot start a new topic
  • Please log in to reply
3 replies to this topic
- - - - -

PatGear

    Grade - Active

  • IFSQN Active
  • 24 posts
  • 1 thanks
0
Neutral

  • Earth
    Earth

Posted 29 May 2018 - 07:55 AM

Hi,

 

We produce a dry powder with a very low microbiological risk. One (commercial) lotnumber  can contain about 10.000kgs of product. It takes about 25 "runs" to produce this 10.000 kgs and we now take retention samples (bags) every run. As the shelf life is 3 years, I now have a massive archive with samples which we barely use (as there have no chemical or microbiological problems appeared so far).

 

How can I determine the best frequency of sampling? It feels kind of safe to have this amount of samples (if there would be a problem we can narrow it down to one specific run), but it seems to me a little overdone also...

 

 



Gerard H.

    Grade - SIFSQN

  • IFSQN Senior
  • 411 posts
  • 131 thanks
44
Excellent

  • France
    France
  • Gender:Male

Posted 29 May 2018 - 08:55 AM

Dear Pat,

 

Indeed, it's good to analyse your processes sometimes, to see whether you are doing the right things.

 

It doesn't seem overdone when looking from the outside. You have just a lot of samples as the shelf life is long. You can look to the quantity (not the frequency) of product you sample, however it needs to be a representative quantity to carry out multiple tests in duplicate or triplicate (Micro, foreign bodies and chemical).

 

In case of a problem with your product, you will be very happy with your massive archive. Because it will limit the damage to your company enormously.  

 

Kind regards,

 

Gerard Heerkens



PatGear

    Grade - Active

  • IFSQN Active
  • 24 posts
  • 1 thanks
0
Neutral

  • Earth
    Earth

Posted 01 June 2018 - 11:57 AM

Ok thank you for your answer. I will stick to the current sampling frequency for now :-)



Thanked by 1 Member:

Alisha

    Grade - Active

  • IFSQN Active
  • 4 posts
  • 0 thanks
0
Neutral

  • New Zealand
    New Zealand

Posted 15 July 2018 - 03:05 AM

You can conduct an analysis to find out the purpose and frequency of the retention sample (i.e. do you use them for shelf life determination, customer complaint investigation or other purpose?), also find out the sample size requirements if there is potential contamination that requires to be re-tested to meet the regulatory standards. A side note is to understand your process to take representative retention samples.  





Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users