Jump to content

  • Quick Navigation
Photo

Internal Audit Quality Objective & Target

Share this

  • You cannot start a new topic
  • Please log in to reply
8 replies to this topic

jeremyyap

    Grade - Active

  • IFSQN Associate
  • 13 posts
  • 1 thanks
1
Neutral

  • Malaysia
    Malaysia

Posted 15 March 2011 - 03:01 PM

Hi, i would like to know to revamp the Internal Audit Quality Objective and target as below:

Objective: To audit according to ISO9001:2008; ISO22000 and Code HACCP System
Target: 100% including the requirements of 3 standard

We are conducting the internal audit and found that it is very hard for us to meet the above objective and target in each interval audit due to every time also must cover all the clauses or sections. We intends to revamp it as to conduct the internal audit based on the weight of the audit findings instead of to cover all the standard at each interval. Question here is how to revamp the above internal audit objective and target? Kindly advise.

Thanks & Best Regards,
Jeremy Yap



Thanked by 1 Member:

Zeeshan

    Grade - SIFSQN

  • IFSQN Senior
  • 499 posts
  • 224 thanks
25
Excellent

  • Pakistan
    Pakistan
  • Gender:Male
  • Location:Karachi, Pakistan
  • Interests:QMS, TQM, FSMS, HMS (Halal Management System), IMS (Integrated Management System), Training Programs Management, Performance Management

Posted 17 March 2011 - 12:37 PM

Very tricky! :whistle:

IMO, there are two options to revamp this objective/target:

1- Change the statement as follows:

Objective: To audit according to ISO9001:2008; ISO22000 and Code HACCP System
Target: Covering at least 2 critical and 2 non-critical areas per quarter with all applicable requirements of the 3 standards.

2- Change the statement as follows:

Objective: To audit according to ISO9001:2008; ISO22000 and Code HACCP System
Target: Covering at least 4 clauses of requirements per standard per quarter.

You may change the values as specified above according to your current actual achievements or possibilities but remember usually all standards have specified that all areas and all requirements should be audited at least once per year. It means you should estimate how many sections of standard and how many areas of your company you have to cover at least once per year. Not to mentions, always focus on critical areas and critical requirements.

Regards:
M.Zeeshan



Tony-C

    Grade - FIFSQN

  • IFSQN Fellow
  • 4,223 posts
  • 1288 thanks
608
Excellent

  • United Kingdom
    United Kingdom
  • Gender:Male
  • Location:World
  • Interests:My main interests are sports particularly football, pool, scuba diving, skiing and ten pin bowling.

Posted 20 March 2011 - 12:59 PM

Hi, i would like to know to revamp the Internal Audit Quality Objective and target as below:

Objective: To audit according to ISO9001:2008; ISO22000 and Code HACCP System
Target: 100% including the requirements of 3 standard

We are conducting the internal audit and found that it is very hard for us to meet the above objective and target in each interval audit due to every time also must cover all the clauses or sections. We intends to revamp it as to conduct the internal audit based on the weight of the audit findings instead of to cover all the standard at each interval. Question here is how to revamp the above internal audit objective and target? Kindly advise.

Thanks & Best Regards,
Jeremy Yap


You should cover all the requirements at least annually then schedule other audits based on risk and audit findings:

Objective: To audit according to ISO9001:2008; ISO22000 and Code HACCP System
Target: 100% including Audit the requirements of all 3 standards over an annual schedule

Regards,

Tony


johanelmander457

    Grade - Active

  • IFSQN Active
  • 6 posts
  • 1 thanks
0
Neutral

  • Uruguay
    Uruguay

Posted 23 March 2011 - 03:37 PM

Hi



You can find this info by using search box in the top of website with some keywords related before posting questions.



johanelmander457

    Grade - Active

  • IFSQN Active
  • 6 posts
  • 1 thanks
0
Neutral

  • Uruguay
    Uruguay

Posted 31 March 2011 - 02:07 AM

Hi



I found that a member asked same question in this forum some months ago.



Pls use search box to find this questions with comments


If you want to get more materials that related to this topic, you can visit: ISO 9001 auditor



Best regards.



mind over matter

    Grade - SIFSQN

  • IFSQN Senior
  • 369 posts
  • 44 thanks
3
Neutral

  • Philippines
    Philippines

Posted 31 March 2011 - 03:38 AM

Hi, i would like to know to revamp the Internal Audit Quality Objective and target as below:

Objective: To audit according to ISO9001:2008; ISO22000 and Code HACCP System
Target: 100% including the requirements of 3 standard

We are conducting the internal audit and found that it is very hard for us to meet the above objective and target in each interval audit due to every time also must cover all the clauses or sections. We intends to revamp it as to conduct the internal audit based on the weight of the audit findings instead of to cover all the standard at each interval. Question here is how to revamp the above internal audit objective and target? Kindly advise.

Thanks & Best Regards,
Jeremy Yap

How about reduce NC’s by 50%? Or perhaps reduce the quantity of NC’s that repeat themselves from one audit to the next? (I’m not sure if the later would be possible in food safety.)


Jason H.Z.C.

    Grade - MIFSQN

  • IFSQN Member
  • 88 posts
  • 19 thanks
1
Neutral

  • China
    China
  • Gender:Male
  • Location:Beijing, China
  • Interests:Basketball, PC Game, My lovely daughter, My Wife,

Posted 01 April 2011 - 02:01 AM

Hi, i would like to know to revamp the Internal Audit Quality Objective and target as below:

Objective: To audit according to ISO9001:2008; ISO22000 and Code HACCP System
Target: 100% including the requirements of 3 standard

We are conducting the internal audit and found that it is very hard for us to meet the above objective and target in each interval audit due to every time also must cover all the clauses or sections. We intends to revamp it as to conduct the internal audit based on the weight of the audit findings instead of to cover all the standard at each interval. Question here is how to revamp the above internal audit objective and target? Kindly advise.

Thanks & Best Regards,
Jeremy Yap



Dear all,

In my personal opinion, purpose of internal audit is to detect the defects of systems(including establishment stage and implementation stage). Than the corrective actions after internal audits are implemented with the purpose of improving the defects detected during internal audit.

So in my personal opinion, we should set at least one objective as "detect at least three NCs for each department". To ensure the internal audit can be conducted in an efficient way. However, this objective should not be in connection with the punishment to earns of the internal auditors, but we could make a bonus mechanism for internal auditors who achieve the aforementioned objective.

Only my personal opinion, for your reference.

Best regards,

Jason

private contact box

Kind Regards,

Jason

Zeeshan

    Grade - SIFSQN

  • IFSQN Senior
  • 499 posts
  • 224 thanks
25
Excellent

  • Pakistan
    Pakistan
  • Gender:Male
  • Location:Karachi, Pakistan
  • Interests:QMS, TQM, FSMS, HMS (Halal Management System), IMS (Integrated Management System), Training Programs Management, Performance Management

Posted 14 April 2011 - 11:57 AM

Dear all,

In my personal opinion, purpose of internal audit is to detect the defects of systems(including establishment stage and implementation stage). Than the corrective actions after internal audits are implemented with the purpose of improving the defects detected during internal audit.

So in my personal opinion, we should set at least one objective as "detect at least three NCs for each department". To ensure the internal audit can be conducted in an efficient way. However, this objective should not be in connection with the punishment to earns of the internal auditors, but we could make a bonus mechanism for internal auditors who achieve the aforementioned objective.

Only my personal opinion, for your reference.

Best regards,

Jason


The purpose of external and internal audits is NOT to detect defects but to verify CONFORMANCE with the auditable standard(s) or specified requirements. The former practice is tagged as "Gap Analysis" which is entirely different as compared to Audit activities.

Regards:
M.Zeeshan.

Edited by Zeeshan, 14 April 2011 - 11:58 AM.


mind over matter

    Grade - SIFSQN

  • IFSQN Senior
  • 369 posts
  • 44 thanks
3
Neutral

  • Philippines
    Philippines

Posted 15 April 2011 - 01:52 AM

Dear all,

In my personal opinion, purpose of internal audit is to detect the defects of systems(including establishment stage and implementation stage). Than the corrective actions after internal audits are implemented with the purpose of improving the defects detected during internal audit.

So in my personal opinion, we should set at least one objective as "detect at least three NCs for each department". To ensure the internal audit can be conducted in an efficient way. However, this objective should not be in connection with the punishment to earns of the internal auditors, but we could make a bonus mechanism for internal auditors who achieve the aforementioned objective.

Only my personal opinion, for your reference.

Best regards,

Jason


They are in part meant to detect problems early. Identified nonconformities typically should trigger an investigation, but not just to detect non-conformities. The objective of an audit is to collect objective evidence to permit an informed judgment about the status of the system or product being audited. look at this way.. Certification Body issue "Certificate of Conformity", therefore they are looking for conformities. It's just that when they look for conformities, oftentimes, they saw non-conformities.

Edited by mind over matter, 15 April 2011 - 01:54 AM.




Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users