Jump to content

  • Quick Navigation
Photo

How do I validate a metal detector CCP?

Share this

  • You cannot start a new topic
  • Please log in to reply
2 replies to this topic

MBrown042

    Grade - MIFSQN

  • IFSQN Member
  • 77 posts
  • 13 thanks
7
Neutral

  • United States
    United States

Posted 24 May 2013 - 08:52 PM

How do i validate a metal detector ccp

 

I work in a bakery and we produce 5 bakery items and all bakery items go through a metal detector.  How do i validate the ccp.

 

Thanks in advance

 

Marvis



HARPC

    Grade - AIFSQN

  • IFSQN Associate
  • 40 posts
  • 13 thanks
2
Neutral

  • United States
    United States
  • Gender:Male
  • Location:California

Posted 24 May 2013 - 09:49 PM

How do i validate a metal detector ccp

 

I work in a bakery and we produce 5 bakery items and all bakery items go through a metal detector.  How do i validate the ccp.

 

Thanks in advance

 

Marvis

 

"Property 2 involves validation. Is there actual metal in the product that has passed through the machine ? If the machine is assumed to be working properly, you won't know. There are a couple of ways to know - customer complaints and product testing. If product testing is done, one can take X amount of samples based on a company's sampling policy if they have one and have the product x-rayed or tested for metal contaminants on a periodic or routine basis such as quarterly semiannual or annual. These documented results would validate the effectiveness of the metal detector."

 

-rkb555

http://www.ifsqn.com...tion-ccp/page-2

 

Maybe another informative thread: http://www.ifsqn.com...-and-not-a-ccp/



Thanked by 3 Members:

tanyaCBF

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 0 thanks
1
Neutral

  • United States
    United States

Posted 10 July 2013 - 12:47 AM

Marvis,

 

Another simple way to validate your metal detector is to engage in an outside contractor to confirm that your equipment is within spec/ critical limits-  Certificates of analysis..

 

 

Hope that helps!





Share this


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users