Jump to content

  • Quick Navigation
Photo

Defining performance specifications for all packaging materials

Share this

  • You cannot start a new topic
  • Please log in to reply
2 replies to this topic

Subha

    Grade - Active

  • IFSQN Active
  • 1 posts
  • 0 thanks
0
Neutral

  • India
    India

Posted 19 June 2013 - 08:38 AM

Dear All,

 

I am initiating a process of defining performance specifications for all packaging material - primary( laminates, PVC trays), secondary (shrink / overwraps) and Tertiary Packaging ( Corrugated Board).

 

I am looking for any advice available on

1. Identifying what tests are needed.

2. How do I define the specifications

 

for eg is MVTR needed? How do I establish a specification?

 

Our products are frozen products like: Chicken burger patty, sausages etc.

 thanks!



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 23 June 2013 - 06:30 AM

Dear All,

 

I am initiating a process of defining performance specifications for all packaging material - primary( laminates, PVC trays), secondary (shrink / overwraps) and Tertiary Packaging ( Corrugated Board).

 

I am looking for any advice available on

1. Identifying what tests are needed.

2. How do I define the specifications

 

for eg is MVTR needed? How do I establish a specification?

 

Our products are frozen products like: Chicken burger patty, sausages etc.

 thanks!

 

Dear Subha,

 

Yr query is rather wide scope which is maybe reason for lack of responses :smile: .

 

Can suggest for starters you try this thread –

 

http://www.ifsqn.com...ate/#entry35333

 

and these attachments may give you some ideas –

 

Attached File  f1 - specifications-in-the-food-packaging-chain.pdf   139.93KB   163 downloads

Attached File  f3 - woolworths packaging spec paperboard - Folding_Cartonboard.pdf   35.51KB   120 downloads

Attached File  f4 - food packaging overview.pdf   450.2KB   127 downloads

 

Rgds / Charles.C


Kind Regards,

 

Charles.C


Thanked by 1 Member:

Peter Snopko

    Grade - AIFSQN

  • IFSQN Associate
  • 35 posts
  • 13 thanks
1
Neutral

  • New Zealand
    New Zealand
  • Gender:Male
  • Location:New Zealand
  • Interests:Art, sailing, woodwork, passion for all things packaging,
    great food and non-Beige people.
    My humour is similar to Billy C.

Posted 04 September 2013 - 10:05 PM

Hello Subha

I concur with Charles in that the subject is quite large and you need to break it down in Sub Categories and look at the requirements for each of these.

They all will have the following;

  1. Dimension Characteristics
  2. Material Characteristics
  3. Performance Characteristics

The performance characteristics are where is gets interesting, as these are specific to each packaging subcategory or substrate;

  • Paper - Corrugated
  • Paper - Folding Carton
  • Paper - Self adhesive Label
  • Paper - Wraps
  • Paper - Multiwall Bags/Sacks
  • Flexibles - Blown and cast film (plain and printed)
  • Flexibles - Laminated film (plain and printed)
  • Rigid Plastics - Blow moulded
  • Rigid Plastics - Injection Moulded
  • Rigid Plastics - Thermoformed
  • Rigid Plastics - Rotomoulded
  • Rigid Plastics - Injection Blow
  • Metal - Tinplate Cans and components
  • Metal - Steel Drums
  • Metal - Strapping
  • Metal - Closures
  • Glass - Containers
  • Wood - Pallets and Bins
  • Wood - Sticks and spoons
  • Others - Adhesives, glues, tape etc

Artwork specifications change more frequently and are best managed in a separate single template/format, which can cover all the sub categories.

 

Raw Materials specifications are also required to manage your approved materials for your products (especially important for food products). Great when quickly you need to see where a material is used when there is an issue.

 

Tooling and Dies also need to be managed in a specification as these are your valuable assets that need to be managed for your IP and ownership.

 

As you can see this is quite a lot of work and needs a carefully planned approach.

 

You can get off the shelf software that can do all this for you, or you can use a packaging specialist to help you build your own system (usually Word or Excel based).

 

The key is to not over spec your packaging and only choose the performance characteristics that apply to the specific packaging item spec you are drafting.

 

You will be very reliant on your packaging vendor for most of the figures if you do not have access to testing facilities to find these out yourselves.

 

Be honest with your packaging vendors when asking for this information, but remember they will try and keep some of the information back from you to protect their commercial advantage.

 

Hope this helps

Cheers

Peter Snopko

www.prd.net.nz


Peter Snopko
Packaging Specialist
Packaging Resources & Development Ltd
Cambridge, New Zealand
www.prd.net.nz
Ph: +64 21 813259

Thanked by 1 Member:


Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users