Jump to content

  • Quick Navigation
Photo

Dieline Requirements for PE bag

Share this

  • You cannot start a new topic
  • Please log in to reply
2 replies to this topic
- - - - -

rizza asilo

    Grade - Active

  • IFSQN Active
  • 9 posts
  • 0 thanks
0
Neutral

  • Philippines
    Philippines

Posted 28 July 2016 - 01:07 AM

Hello!

 

Can someone tell me how to make a dieline drawing for our packaging design (tips, pointer to consider, etc.)?

One of our customer is requiring this and I don't have much idea about this. Even our packaging material supplier is not so familiar with this.

 

Your help is badly needed.

Thank you in advance :)



Labucknall

    Grade - Active

  • IFSQN Active
  • 12 posts
  • 3 thanks
1
Neutral

  • Jamaica
    Jamaica

Posted 29 July 2016 - 08:24 PM

When doing the die lines, do a flat drawing taking into consideration the measurements for the sealing zones , gusset areas (if applicable), head space, also where print is allowed/ not allowed and if there is an eye mark on the film note the size. 

 

I've attached a simple example. 

 

Loika Attached File  Die line example.docx   67.07KB   11 downloads

   



Thanked by 2 Members:

rizza asilo

    Grade - Active

  • IFSQN Active
  • 9 posts
  • 0 thanks
0
Neutral

  • Philippines
    Philippines

Posted 07 September 2016 - 12:31 AM

Noted with thanks :) I finished my own dieline a month ago.

Hopefully all is well. 

Thanks!





Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users