Jump to content

  • Quick Navigation
Photo

Water filtration 100 microns?

Share this

  • You cannot start a new topic
  • Please log in to reply
7 replies to this topic

Patopod

    Grade - Active

  • IFSQN Active
  • 5 posts
  • 0 thanks
0
Neutral

  • Spain
    Spain

Posted 08 May 2017 - 09:01 AM

Hi all,

 

We have a specific retailer requirement which says " All water used on site within process areas (cleaning etc) should be filtered to a minimum of 100 micron". All water used in our plant comes from municipal water and it is potable. We have an osmosis plant for water used as ingredient but not all water used in process areas is filtered. Can anyone help me with it?

 

Thanks :)



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 08 May 2017 - 09:53 AM

Hi all,

 

We have a specific retailer requirement which says " All water used on site within process areas (cleaning etc) should be filtered to a minimum of 100 micron". All water used in our plant comes from municipal water and it is potable. We have an osmosis plant for water used as ingredient but not all water used in process areas is filtered. Can anyone help me with it?

 

Thanks :)

 

Hi Patopod,

 

Can you clarify what kind of help you are seeking ?

 

eg -

 

Supplier of filters in Spain ?

 

Regulatory requirements for process water in Spain ?


Kind Regards,

 

Charles.C


Thanked by 1 Member:

Patopod

    Grade - Active

  • IFSQN Active
  • 5 posts
  • 0 thanks
0
Neutral

  • Spain
    Spain

Posted 08 May 2017 - 09:55 AM

I just want to know if It is necessary to install filters of that size en process areas despite water is treated by water supply company.



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 08 May 2017 - 10:53 AM

I just want to know if It is necessary to install filters of that size en process areas despite water is treated by water supply company.

 

Hi Patopod,

 

IMEX (not in Spain) the typical regulatory requirement is that process water must comply with local regulations. This usually means comply to a local drinking water standard. Hopefully the local water complies with such standard.

 

For export to EC, the water is required to comply with EC regulations which are available on IT.

 

i don't recall any generic reference to specific filter requirements for process water but (a) there may be a specific local requirement, (b) it may depend on what you are using the water for ?.


Kind Regards,

 

Charles.C


FurFarmandFork

    Food Safety Consultant, Production Supervisor

  • IFSQN Fellow
  • 1,264 posts
  • 590 thanks
206
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Oregon, USA

Posted 08 May 2017 - 01:41 PM

100 microns is meaningless from a water safety perspective...that's not even small enough to sort out large protozoans. It would only help with water clarity, so maybe they've had problems with rust/particulates in products in the past?

 

This requirement makes no sense to me.


Austin Bouck
Owner/Consultant at Fur, Farm, and Fork.
Consulting for companies needing effective, lean food safety systems and solutions.

Subscribe to the blog at furfarmandfork.com for food safety research, insights, and analysis.

Thanked by 1 Member:

peeviewonder

    Grade - AIFSQN

  • IFSQN Associate
  • 36 posts
  • 13 thanks
4
Neutral

  • United States
    United States

Posted 08 May 2017 - 02:13 PM

I agree with F3. This is a ridiculous requirement, and has nothing to do with food safety. Could you perhaps collect some information on your water quality (micros etc.) and present it to the customer in the hope that you can be exempt from the requirement? If not, price out the cost of adding the water filters and add that cost to the product that you sell to them.



Thanked by 1 Member:

Ryan M.

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,327 posts
  • 479 thanks
290
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Birmingham, AL
  • Interests:Reading, crosswords, passionate discussions, laughing at US politics.

Posted 12 May 2017 - 05:05 PM

Question the supplier on their reasoning for this.  If you can flesh that out and do a risk assessment they may be fine with it.  Water may play a critical role in their product which may be why they want to have that in place.

 

If they are being hard lined about the requirement see if it makes more sense to install the filter or use your RO water for their products.



AsiaHorner

    Grade - Active

  • IFSQN Active
  • 1 posts
  • 0 thanks
0
Neutral

  • Earth
    Earth

Posted 02 September 2020 - 09:22 PM

This requirement is useless. I think that it just fills the price of the product due to the cost of filters





Share this


Also tagged with one or more of these keywords: water, filtration, 100microns

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users