Jump to content

  • Quick Navigation
Photo

Cooling Process Validation for Cheesecake, Pie and Baked Custards

Share this

  • You cannot start a new topic
  • Please log in to reply
10 replies to this topic

rebecca1981

    Grade - Active

  • IFSQN Active
  • 17 posts
  • 1 thanks
1
Neutral

  • United States
    United States

Posted 19 January 2018 - 08:06 PM

We are looking for resources and or schemes to validate and verify the safety of low cooking temperatures and slow cooling required for some delicate types of baked cheesecakes, pies, and custards. Recipes call for baking and cooling steps that do not meet the generally accepted standards for cooking and cooling potentially hazardous products (70 degrees in 2 hours and 40 degrees in an additional 4 hours; and internal baking temperatures high enough for kill step). AIB kill step calculators indicate a partial kill step for some larger items of 3 to 4 log reduction. AIB recommends a 5.06 minimum log reduction to qualify as kill step. After baking, these larger products must be cooled slowly to prevent cracking and to allow the item to properly "set."
 
To further complicate the issue, for the larger items that do not reach full kill step temperatures, does the time/temp monitoring clock start when the raw ingredients are pulled from cold storage and blending begins?
 
We are open to all ideas and schemes from process changes (recipe changes, forced cooling, baking speed/temp changes), monitoring/logging activities, lab testing of raw ingredients and/or finished product. Goal would be to maintain current manufacturing process but validate and verify the safety of the product on a continuing basis.  
 
Thanks in advance for any thoughts, ideas, etc.


GMO

    Grade - FIFSQN

  • IFSQN Fellow
  • 2,791 posts
  • 721 thanks
224
Excellent

  • United Kingdom
    United Kingdom

Posted 24 January 2018 - 10:58 AM

For something so "out of the norm" I'd do some microbiological modelling.  In the UK there is a highly respected organisation called Campden BRI who can undertake that kind of modelling for you and there are presumably US organisations who can do something similar.  Unfortunately if your product isn't one of the "one size fits all" group then it can be a challenge but you may find a combination of hurdle factors, e.g. the Aw being lower due to sugar content, slightly low pH, combined with the baking time may be enough but then it would be key if you redesigned your product some day, to, say, reduce sugar, that you then repeat the exercise.



Thanked by 1 Member:

rebecca1981

    Grade - Active

  • IFSQN Active
  • 17 posts
  • 1 thanks
1
Neutral

  • United States
    United States

Posted 24 January 2018 - 12:05 PM

Thank you so much for your response.

 

We'll do some research and see if we can find a counterpart in the U.S. The organization in the UK you mentioned looks like an AMAZING resource. A lot of the microbiological testing companies here in the U.S. seem to offer some of these services, but I haven't seen anything like the Member Interest Groups that Campden BRI offers. 

 

We are a small manufacturing company with limited resources, so I am concerned that doing studies like you mention are not feasible for us, but we'll price them out and see. If anyone has any other "creative" suggestions that might fit the bill for a manufacturing company with limited resources, would love to know them. 



FurFarmandFork

    Food Safety Consultant, Production Supervisor

  • IFSQN Fellow
  • 1,264 posts
  • 590 thanks
206
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Oregon, USA

Posted 24 January 2018 - 04:09 PM

Hi Rebecca1981

 

I've had great conversations with Covance about these types of studies, they should be able to help you: https://www.covance....alidations.html


Austin Bouck
Owner/Consultant at Fur, Farm, and Fork.
Consulting for companies needing effective, lean food safety systems and solutions.

Subscribe to the blog at furfarmandfork.com for food safety research, insights, and analysis.

Thanked by 1 Member:

jcieslowski

    Grade - MIFSQN

  • IFSQN Member
  • 196 posts
  • 61 thanks
32
Excellent

  • United States
    United States
  • Gender:Male

Posted 24 January 2018 - 04:19 PM

You might consider NSF: http://www.nsf.org/s...ype/lab-testing



Thanked by 1 Member:

GMO

    Grade - FIFSQN

  • IFSQN Fellow
  • 2,791 posts
  • 721 thanks
224
Excellent

  • United Kingdom
    United Kingdom

Posted 24 January 2018 - 04:48 PM

Sorry I tried to post earlier but it didn't let me!  One option is to get the Aw, pH etc figures and still contact Campden BRI to do the modelling.  They will do work for you even if you're not a member, it's just a bit more expensive.  It's still cheaper than challenge testing though.



Thanked by 1 Member:

rebecca1981

    Grade - Active

  • IFSQN Active
  • 17 posts
  • 1 thanks
1
Neutral

  • United States
    United States

Posted 24 January 2018 - 05:43 PM

Sorry I tried to post earlier but it didn't let me!  One option is to get the Aw, pH etc figures and still contact Campden BRI to do the modelling.  They will do work for you even if you're not a member, it's just a bit more expensive.  It's still cheaper than challenge testing though.

 

GMO, thank you! Quick, ignorant question: Is there an argument for working with an organization in the U.S., or would Campden BRI be able to offer insight into ensuring regulatory compliance with FDA? 



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 25 January 2018 - 02:31 AM

Hi rebecca,

 

The obvious query is how do you handle the lack of validation material so as to be able to commercialise these special products at the moment ?

 

Regarding Consultants, I fear you are going to be faced with some significant quotations for Literature research.

 

Do you not have any Bakery Trade Organisations in USA ? If so, such an approach may to be the quickest/most efficient/cheapest way to go.

FDA are an obvious alternative if you don't mind involving such legalistic connections.

 

Cooling validations have been discussed here several times and, as detailed in those threads, can often be non-consensus. IIRC there are some threads related to baking processes but I'm unsure if yr special situation is considered. You can find various alternatives to the data you mention in OP in the literature, as i expect you know. (it seems highly unlikely to me that AIB would suggest a 5.06 log reduction, why not 5 or 6 ?).

 

I predict that for a large Industry like Baking, the topic in yr OP has been encountered already in the Literature, and probably in the context of Regulatory issues also.

 

There is a highly detailed haccp plan for, afai can remember,  "normal" cheesecake attached on this forum. But offhand, i don't recall if it included "Validation" material.

 

PS - as per GMO's comments there are some, long established, highly sophisticated modelling software facilities available in US for process stages but you will need some expertise to do it yourself. Whether any free options available I have no idea unfortunately.


Kind Regards,

 

Charles.C


Thanked by 1 Member:

GMO

    Grade - FIFSQN

  • IFSQN Fellow
  • 2,791 posts
  • 721 thanks
224
Excellent

  • United Kingdom
    United Kingdom

Posted 25 January 2018 - 12:18 PM

GMO, thank you! Quick, ignorant question: Is there an argument for working with an organization in the U.S., or would Campden BRI be able to offer insight into ensuring regulatory compliance with FDA? 

 Yes there probably is that argument.  While UK organisations can advise on US legislation (handy having mostly the same language) it may hold more weight with an FDA auditor if it's done in the US.

 

I like Charles' idea about Bakery Trade Associations but have to be honest the trade associations I've been part of wouldn't share this kind of information with competitors. 

 

Another thought I had but it might not be cheaper is to see if you could get a University to help you.  In the UK, you can quite often get "sandwich placement" students (students who spend their 3rd year in industry before returning for a 4th to University) or summer project students.  Often the cost is relatively low and can sometimes be part funded by the institution.  Knowing the different attitude to finance in the US though I'm not sure that would be the case for you.



Thanked by 1 Member:

MWidra

    Grade - PIFSQN

  • IFSQN Principal
  • 778 posts
  • 314 thanks
143
Excellent

  • United States
    United States
  • Gender:Female
  • Location:On the Beautiful Eastern Shore of MD
  • Interests:My Dogs (Beagles),Gardening, SciFi, Video Games (WoW, D3, HoS, PvZ), Classical Music, Legal Stuff, Science Stuff. I'm a Geeky Nerd.

Posted 25 January 2018 - 03:26 PM

As the OP knows, AIB is a bakery trade organization. They have a page where you can download kill step calculators for various bakery foods, and Cheesecake is one of them. So I would suspect that you could at least get some preliminary information on the cooling process. They do perform process research, so they could be someone to do that for you.

 

They are a non- profit organization, so even though it would not be free, it could be more reasonable. And they have credibility in the US.

 

http://www.aibonline...lculators.aspx 

 

Martha


"...everything can be taken from a man but one thing:  the last of the human freedoms--to choose one's attitude in any given set of circumstances, to choose one's own way."  Viktor E. Frankl

 

"Life's like a movie, write your own ending."  The Muppets


Thanked by 3 Members:

GMO

    Grade - FIFSQN

  • IFSQN Fellow
  • 2,791 posts
  • 721 thanks
224
Excellent

  • United Kingdom
    United Kingdom

Posted 25 January 2018 - 09:24 PM

As the OP knows, AIB is a bakery trade organization. They have a page where you can download kill step calculators for various bakery foods, and Cheesecake is one of them. So I would suspect that you could at least get some preliminary information on the cooling process. They do perform process research, so they could be someone to do that for you.

 

They are a non- profit organization, so even though it would not be free, it could be more reasonable. And they have credibility in the US.

 

http://www.aibonline...lculators.aspx 

 

Martha

 

You got the local knowledge I don't have!  Obviously I know AIB but didn't know they did that.  Great tip!





Share this


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users