Jump to content

  • Quick Navigation
Photo

Storage Freezer Cleaning

Share this

  • You cannot start a new topic
  • Please log in to reply
5 replies to this topic

qalab1998

    Grade - Active

  • IFSQN Active
  • 3 posts
  • 0 thanks
0
Neutral

  • United States
    United States

Posted 15 May 2018 - 08:15 PM

We have ice build-up in our storage freezers.

ceiling, walls, floors

We are looking at finding preventive fix but until then does anyone have effective ideas for removing ice safely and then for cleaning surfaces after?

So far we've just been offered one suggestion from a chemical company but it ended up removing the clear protectant from the floor.

The different storage rooms range from -20 to 0F.

 

And they are never emptied so warming the area is not a potential solution.

 

Thank you



Scampi

    Fellow

  • IFSQN Fellow
  • 5,486 posts
  • 1511 thanks
1,550
Excellent

  • Canada
    Canada
  • Gender:Not Telling

Posted 15 May 2018 - 08:43 PM

These should be on your sanitation schedule and really should be emptied and defrosted regularly (doesn't have to be often).

 

It sounds like you have either missing gaskets on the doors and/or your refer unit is not functioning as intended (one more reason it should be shut down)

 

Is this a ammonia system?


Please stop referring to me as Sir/sirs


Alex1990

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 0 thanks
0
Neutral

  • Ecuador
    Ecuador

Posted 15 May 2018 - 09:04 PM

Efectivamente, las camaras o tuneles no deberian producir hielo esto es un claro indicador de falta de juntas, aparte economicamente es muy costosa mantener este tipo de fugas.



Gerard H.

    Grade - SIFSQN

  • IFSQN Senior
  • 411 posts
  • 131 thanks
44
Excellent

  • France
    France
  • Gender:Male

Posted 16 May 2018 - 07:09 AM

Hello,

 

Indeed, thawing regularly. You can empty the freezer by storing your products elsewhere during the thawing operation.

 

And improve the situation as much as possible. I would invite several industrial freezer builders and let them do proposals to reduce the ice forming.

 

Please note, that icing on the ceiling is very dangerous as it can fall down. It's necessary to avoid accidents.

 

Kind regards,

 

Gerard Heerkens



FurFarmandFork

    Food Safety Consultant, Production Supervisor

  • IFSQN Fellow
  • 1,264 posts
  • 590 thanks
206
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Oregon, USA

Posted 16 May 2018 - 02:27 PM

 

And they are never emptied so warming the area is not a potential solution.

 

Thank you

 

You may not need to do it more than every 6 months or even annually. Some options since you said you don't have other cold storage.

 

Thaw small spaces at a time with a hair dryer.

 

Have a local trucking company drop a "Reefer" off at your facility for a couple days, move your products into it to keep them cold, and thaw your freezer. Move them back when done.

 

Get a large insulated container, pre-chill it in your freezer, and move your stuff into it, you'll have something like 6-8 hours of working time to thaw and remove ice before it gets too warm, or you can pack your stuff in there with dry ice and have as much time as you have ice.


Austin Bouck
Owner/Consultant at Fur, Farm, and Fork.
Consulting for companies needing effective, lean food safety systems and solutions.

Subscribe to the blog at furfarmandfork.com for food safety research, insights, and analysis.

Teecem

    Grade - AIFSQN

  • IFSQN Associate
  • 29 posts
  • 19 thanks
1
Neutral

  • United Kingdom
    United Kingdom

Posted 23 May 2018 - 10:45 PM

Hi you do need to defrost your freezer it should be part of your planned preventative maintenance, no freezer will last forever without some basic maintenance and they becomes less efficient the more ice that builds up so could become an issue for the food you are storing. In the past ive always hired a trailer whilst getting them cleaned and repaired its the most expedient way to do it. I was also told it was impossible because they were always in use turns out it was just difficult and more work then anyone wanted to do!





Share this


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users