Jump to content

  • Quick Navigation
Photo

Temporary repairs - masking tape everywhere!

Share this

  • You cannot start a new topic
  • Please log in to reply
13 replies to this topic

sarahm96

    Grade - Active

  • IFSQN Active
  • 14 posts
  • 0 thanks
0
Neutral

  • United Kingdom
    United Kingdom

Posted 24 July 2019 - 01:25 PM

Hi all,

 

We are currently chipping away at various issues as we prepare for getting BRC accredited. One major thing is the use of duct tape, but more often amsking tape for temporary fixes. It everywhere, and is commonly found around the edges of tables to stop people catching themselves on any sharp edges/corners. I know this would be a major no-go for BRC but at the same time I don't want people getting injured when working. I wondered about a blue rubber strip to go round the edges of the tables etc. which would cushion but is blue, so detectable, and a more permanent solution? But I'm struggling to source some material.

 

Has anyone else cone across this issue before, or have any ideas on how I could rectify this without breaching BRC guidelines, and still keeping operators safe?

 

Thanks!

 

Attached File  IMG_20190724_142225.jpg   114.82KB   4 downloads



pHruit

    Grade - FIFSQN

  • IFSQN Fellow
  • 2,071 posts
  • 849 thanks
536
Excellent

  • United Kingdom
    United Kingdom
  • Gender:Male
  • Interests:Composing/listening to classical music, electronics, mountain biking, science, sarcasm

Posted 24 July 2019 - 01:43 PM

You're right - that is a lot of masking tape!

 

What is the table made of - is it just steel, or is that just a top surface with something else underneath it?

We only have metal tables, but the corners are built / sanded to be slightly rounded so there are no sharp edges to catch on clothes etc. Could yours be modified in a similar fashion?



Thanked by 1 Member:

sarahm96

    Grade - Active

  • IFSQN Active
  • 14 posts
  • 0 thanks
0
Neutral

  • United Kingdom
    United Kingdom

Posted 24 July 2019 - 01:46 PM

Hi pHruit,

 

Most are a wooden base with a steel or aluminium top on them. I'm not sure how we could modify as the metal is quite thin on the top.



Timwoodbag

    Grade - MIFSQN

  • IFSQN Member
  • 210 posts
  • 68 thanks
33
Excellent

  • United States
    United States
  • Gender:Male

Posted 24 July 2019 - 01:57 PM

Have someone sand it down, would take a few minutes per table with the right tool.  You can see on the table in the back that you guys hand made these aluminum tops, but nobody grinded/sanded after cutting (No pride was put into that work honestly).



Thanked by 1 Member:

The Food Scientist

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,057 posts
  • 268 thanks
208
Excellent

  • United States
    United States
  • Gender:Female
  • Interests:Food Science, Nature, SQF, Learning, Trying out new foods, Sarcasm.

Posted 24 July 2019 - 04:05 PM

Consult with your maintenance department on solutions with those tables. That tape needs to go! 


Everything in food is science. The only subjective part is when you eat it. - Alton Brown.


Thanked by 1 Member:

SQFconsultant

    SQFconsultant

  • IFSQN Fellow
  • 4,629 posts
  • 1135 thanks
1,125
Excellent

  • United States
    United States
  • Gender:Male
  • Interests:Just when I thought I was out - They pulled me back in!!!

Posted 24 July 2019 - 04:28 PM

I agree with Timwoodbag, pretty shoddy workmanship.

I do see epoxy applied rubber cushioning bumper strip in my travels - they still however must be cleaned properly at the junctions.


All the Best,

 

All Rights Reserved,

Without Prejudice,

Glenn Oster.

Glenn Oster Consulting, LLC -

SQF System Development | Internal Auditor Training | eConsultant

 

 

Martha's Vineyard Island, MA - Restored Republic

http://www.GCEMVI.XYZ

http://www.GlennOster.com

 

774.563.7048


Thanked by 1 Member:

Hoosiersmoker

    Grade - PIFSQN

  • IFSQN Principal
  • 683 posts
  • 228 thanks
122
Excellent

  • United States
    United States

Posted 30 July 2019 - 07:00 PM

What type of manufacturing are we talking about? There have been changes for Manufacture of Food Packaging. Many of our processes (folder gluers) almost REQUIRE us to tape items in the window voids to allow them to feed smoothly into the machines. The risk is extremely low and there's no food to contaminate with the tape, however the Operators immediately know if anything has come off as the machine will jam. At that point the Operator will find any tape that came off and re-attach the part to the machine. These are no longer termed as temporary repairs, they are attachments to the processing equipment.



Thanked by 1 Member:

mgourley

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,403 posts
  • 997 thanks
274
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Plant City, FL
  • Interests:Cooking, golf, firearms, food safety and sanitation.

Posted 30 July 2019 - 08:58 PM

Quite simply, the maintenance department needs to fabricate (or fix existing) fixtures to ensure they are cleanable and do not pose an occupational safety hazard.
We all fight tape repairs done by production employees, because they see the immediate need (for whatever reason). That does not mean we have to accept this as a "permanently temporary repair".

Marshall



Thanked by 1 Member:

sarahm96

    Grade - Active

  • IFSQN Active
  • 14 posts
  • 0 thanks
0
Neutral

  • United Kingdom
    United Kingdom

Posted 13 August 2019 - 08:12 AM

The factory produces paper sacks and sheeted paper for food contact applications. They use masking tape to join reels of paper etc, so couldn't remove from site (although I would love to!) but hoping to get areas permanently fixed, then will need to find a way of discouraging the use of tape to "fix" equipment.



Hoosiersmoker

    Grade - PIFSQN

  • IFSQN Principal
  • 683 posts
  • 228 thanks
122
Excellent

  • United States
    United States

Posted 13 August 2019 - 11:49 AM

For the cost of your labor, it's probably cheaper to purchase tables from an industrial supply company. I'm in the US and use McMaster Carr or Grainger. Stationary, height adjustable tables about 60cm X 120cm (24" X 48") are less than $300 US. Once you figure in the cost of your maintenance dept labor to create tables, and what they aren't working on during the table build, you're money ahead. And it only takes about 15 minutes to assemble one. The appearance to your auditor will be valuable as well. We went through and just replaced about 15 or 16 older wooden tables throughout the plant and following additions all stipulated metal construction. It's a one time cost that will more than pay for itself and one less thing to affect your process. Good luck on certification!



Thanked by 1 Member:

Scampi

    Fellow

  • IFSQN Fellow
  • 5,444 posts
  • 1507 thanks
1,523
Excellent

  • Canada
    Canada
  • Gender:Not Telling

Posted 13 August 2019 - 12:02 PM

The other item not mentioned is the WOOD.....wood should only be present when unavoidable i.e. pallets


Please stop referring to me as Sir/sirs


Thanked by 1 Member:

sarahm96

    Grade - Active

  • IFSQN Active
  • 14 posts
  • 0 thanks
0
Neutral

  • United Kingdom
    United Kingdom

Posted 13 August 2019 - 12:04 PM

Yes, I've got a fair bit of work to do with wooden items on the shop floor also.

 

Does anyone know of any reasonably priced uk suppliers of metal tables?



Hoosiersmoker

    Grade - PIFSQN

  • IFSQN Principal
  • 683 posts
  • 228 thanks
122
Excellent

  • United States
    United States

Posted 13 August 2019 - 12:07 PM

I believe you have MSC  as an industrial supplier



Hoosiersmoker

    Grade - PIFSQN

  • IFSQN Principal
  • 683 posts
  • 228 thanks
122
Excellent

  • United States
    United States

Posted 13 August 2019 - 12:41 PM

Not sure how viable but this might fit the bill: https://www.ajproduc...ductId=19446486



Thanked by 1 Member:


Share this


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users