Jump to content

  • Quick Navigation
Photo

Printed Codes Keep Fading

Share this

  • You cannot start a new topic
  • Please log in to reply
2 replies to this topic
- - - - -

dj.E

    Grade - Active

  • IFSQN Active
  • 15 posts
  • 1 thanks
0
Neutral

  • Philippines
    Philippines

Posted 24 November 2020 - 12:17 PM

Hi :-), our company plans to upgrade to Vertical form fill seal packing machine that is connected to an inkjet printer. We are now testing the print quality especially during freezing and storing stage. Our product is a marinated uncooked chicken cuts that we blast freeze after packing in LDPE bags. The problem is, the label printed on the packaging is easily erased after freezing. Has anyone experienced the same? What can we do to make sure the label stays on the packaging? Appreciate any suggestions to help us out. Thanks.

 



Slab

    Grade - SIFSQN

  • IFSQN Senior
  • 438 posts
  • 208 thanks
105
Excellent

  • United States
    United States
  • Gender:Male
  • Location:The Heel of the Boot
  • Interests:Reading (history, science fiction), Photography, drawing,food safety, metrology, TQM, hoplology, etc.

Posted 24 November 2020 - 12:54 PM

Have you contacted the printer manufacturer? 

 

Maybe this explanation will help;

 

 
Surface Tension of the Substrate

The same way an insect like the water strider can stand on water’s surface without falling in, surface tension plays a role in whether the ink will properly adhere to the plastic or just wipe away when touched.

To ensure ink adhesion to the plastic surface, it’s recommended that the surface tension of the ink should be at least 10 dynes lower than the surface free energy of the plastic sheet. This is because liquids don’t dampen planes with surface free energy lower than the surface tension of the liquid. Translation: if you’ve got a bad surface tension/surface free energy match up, the ink will sit atop the plastic, barely contacting the plastic itself. If you have a good ink/surface match, the ink will lay flatter against the plastic, allowing it to “wet” or “dampen” the plastic surface (and that’s what you want). According to Printing.org, for ideal inkjet printing you should select plastic sheets with free surface energies between 40-50 dynes. Always keep in mind, however, that this number varies for different printers and printing techniques.

 


Food Safety News  Marine Stewardship Council

 

"Some people freak out when they see small vertebra in their pasta" ~ Chef John


SQFconsultant

    SQFconsultant

  • IFSQN Fellow
  • 4,632 posts
  • 1135 thanks
1,126
Excellent

  • United States
    United States
  • Gender:Male
  • Interests:Just when I thought I was out - They pulled me back in!!!

Posted 24 November 2020 - 12:58 PM

Need to match the type of ink used to the material it is going on, the smoother the surface the more likely the issue.  You may want to interface with the manufactuer of the inkjet to get their input based on the type, smoothness, thickness, etc. of the packaging itself.


All the Best,

 

All Rights Reserved,

Without Prejudice,

Glenn Oster.

Glenn Oster Consulting, LLC -

SQF System Development | Internal Auditor Training | eConsultant

Martha's Vineyard Island, MA - Restored Republic

http://www.GCEMVI.XYZ

http://www.GlennOster.com

 




Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users