What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Analysis frequency for flour

Started by , Mar 25 2021 01:44 PM
3 Replies

Hello everyone, I'm preparing a new sampling plan to control the flour in our plant but I don't know which frequency I should put for those molecules: ergot, alcaloides, and chloride. We did some studies and it seems that we have those contaminants in a high level in our product. Thank you for your help

 

Share this Topic
Topics you might be interested in
Preliminary Steps to Hazard Analysis Preliminary Steps to Hazard Analysis Defrosting / thawing of sample for analysis CCP and Preventive Control in the same Hazard Analysis Root cause analysis help for SQF audit corrective actions
[Ad]

Hello everyone,

 

I m preparing a new sampling plan to control the flour in our plant but i don't know which frequency i should put for those moleculs: ergot, alcaloides, and chloride.

 

We did some studies and it seems that we have those contaminants in a high level in our product.

 

Thank you for your help

 

Hi fouziak,

 

Respectfully, yr query is unanswerable without knowing yr specific quantitative objective(s).

 

Generically, maybe consult some AQL tables if you wish an accept/reject solution.

 

Or apply an SPC approach if familiar to you.

Hi fouziak,

 

Respectfully, yr query is unanswerable without knowing yr specific quantitative objective(s).

 

Generically, maybe consult some AQL tables if you wish an accept/reject solution.

 

Or apply an SPC approach if familiar to you.

Dear Charles,

I don't know what do you mean by our specific quantitative obkective. According to the new regelementations we should control if there is alcaloides, ergot in our product (wheat, flou, gluten, syrup) and we have our acceptance limits.

We did some controls for two months and all results show that we have those moleculs in our product.

I don't know how to use AQL or SPC approach in this case.

we produce high quantity of flour and big volume of syrup every day

Dear Charles,

I don't know what do you mean by our specific quantitative obkective. According to the new regelementations we should control if there is alcaloides, ergot in our product (wheat, flou, gluten, syrup) and we have our acceptance limits.

We did some controls for two months and all results show that we have those moleculs in our product.

I don't know how to use AQL or SPC approach in this case.

we produce high quantity of flour and big volume of syrup every day

 

I deduce yr objective is to determine whether -

 

(a) Average Lot concentration alcaloides < X ppm

(b) Average Lot concentration ergot < Y ppm

 

Please see this Post/thread and sub-links wherein -

 

https://www.ifsqn.co...lan/#entry99164


Similar Discussion Topics
Preliminary Steps to Hazard Analysis Preliminary Steps to Hazard Analysis Defrosting / thawing of sample for analysis CCP and Preventive Control in the same Hazard Analysis Root cause analysis help for SQF audit corrective actions Preparing Gap Analysis for New ISO TS 22002:100 and 22002:1 Request for Raw Material Hazard Analysis Example – Chemical and Microbial Co-Manufacturing with Kosher Supervision – Hazard Analysis Hair and Beard Covering Risk Analysis for Packaging Facilities (BRCGS Issue 7) Can Data Cutoff Dates Differ for Audits vs. Internal Analysis?