Jump to content

  • Quick Navigation
Photo

Tanks inspection sheet

Share this

  • You cannot start a new topic
  • Please log in to reply
1 reply to this topic
- - - - -

QA2021

    Grade - Active

  • IFSQN Active
  • 15 posts
  • 0 thanks
0
Neutral

  • France
    France

Posted 03 August 2021 - 10:14 AM

Hello everyone, I'm preparing a document related to the inspection of the tanks before loading. Could you please tell me what I should check? I put absence of dirt, odours, integrity. I have to add something more? Do you have please an example to share? Best regards



pHruit

    Grade - FIFSQN

  • IFSQN Fellow
  • 2,071 posts
  • 849 thanks
536
Excellent

  • United Kingdom
    United Kingdom
  • Gender:Male
  • Interests:Composing/listening to classical music, electronics, mountain biking, science, sarcasm

Posted 03 August 2021 - 01:03 PM

Is this your own tanks on site, or road tankers that you are loading?
 

For the former, I'd also check the cleaning verification - what method(s) are you using? e.g. ATP, pH of rinse water, allergen swabs to confirm previous contents and cleaning chemicals have been removed.

 

For road tankers I'd also want to see the record from the tanker cleaning station (EFTCO cleaning certificate, as you're in Europe), confirmation of last three loads, verification of seal numbers, and potentially you could also ask your tanker suppliers to ensure that there is some water kept in the tanker from the last rinse, so you can also check this if needed.





Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users