Jump to content

  • Quick Navigation
Photo

Risk Zones Hygiene Requirement

Share this

  • You cannot start a new topic
  • Please log in to reply
12 replies to this topic

Lelouch_rayne

    Grade - MIFSQN

  • IFSQN Member
  • 160 posts
  • 26 thanks
6
Neutral

  • Earth
    Earth
  • Gender:Not Telling

Posted 09 December 2015 - 04:57 AM

Hai guys,

 

Do you know some link where i can use as reference to determine the hygiene/cleaning requirements needed in a particular risk zone. The zone i identified are Low risk and enclosed product area. I'm having a head ache  :blush:

 

Thanks,

 

Joan



mrousselon

    Grade - Active

  • IFSQN Active
  • 3 posts
  • 2 thanks
0
Neutral

  • Mexico
    Mexico

Posted 09 December 2015 - 05:36 AM


Edited by Simon, 10 December 2015 - 06:54 AM.
edited


Thanked by 1 Member:

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 09 December 2015 - 06:05 AM

Hai guys,

 

Do you know some link where i can use as reference to determine the hygiene/cleaning requirements needed in a particular risk zone. The zone i identified are Low risk and enclosed product area. I'm having a head ache  :blush:

 

Thanks,

 

Joan

Hi Joan,

 

I assume this is BRC7 Food.

 

the zoning system has analogies to some other systems but I suspect is unique to BRC in some respects

 

Can see this BRC document, esp. appendix, pgs 16-19 -

 

Attached File  brc - Understanding_high_risk.pdf   7.48MB   341 downloads

( this is BRC6 so no ambient high care yet)(there may be an update to BRC7 but I haven't seen one)

 

PS -  the text within the BRC7 standard is also rather good IMO also but requires several readings IMEX.

 

PPS - you could post yr process here and get some free opinions :smile:

 

P3S - if it's really low Risk, the requirements are probably as spelled out in the Standard


Kind Regards,

 

Charles.C


Thanked by 1 Member:

IzzyP

    Grade - AIFSQN

  • IFSQN Associate
  • 36 posts
  • 16 thanks
7
Neutral

  • Earth
    Earth

Posted 09 December 2015 - 08:36 AM

Why don't you ask your cleaning chemical provider to come is and offer an opinion.

 

In the UK, they would do the cleaning instruction cards based on your process / production schedules.



Lelouch_rayne

    Grade - MIFSQN

  • IFSQN Member
  • 160 posts
  • 26 thanks
6
Neutral

  • Earth
    Earth
  • Gender:Not Telling

Posted 09 December 2015 - 09:40 AM

Why don't you ask your cleaning chemical provider to come is and offer an opinion.

 

In the UK, they would do the cleaning instruction cards based on your process / production schedules.

 

I thought it would be based on your risk assessment?



Lelouch_rayne

    Grade - MIFSQN

  • IFSQN Member
  • 160 posts
  • 26 thanks
6
Neutral

  • Earth
    Earth
  • Gender:Not Telling

Posted 09 December 2015 - 09:52 AM

Hi Joan,

 

I assume this is BRC7 Food.

 

the zoning system has analogies to some other systems but I suspect is unique to BRC in some respects

 

Can see this BRC document, esp. appendix, pgs 16-19 -

 

attachicon.gifbrc - Understanding_high_risk.pdf

( this is BRC6 so no ambient high care yet)(there may be an update to BRC7 but I haven't seen one)

 

PS -  the text within the BRC7 standard is also rather good IMO also but requires several readings IMEX.

 

PPS - you could post yr process here and get some free opinions :smile:

 

P3S - if it's really low Risk, the requirements are probably as spelled out in the Standard

Hi Charles,

 

That's what i've been looking for but not the content is not applicable to our site :(

 

Best regards,

 

Joan



IzzyP

    Grade - AIFSQN

  • IFSQN Associate
  • 36 posts
  • 16 thanks
7
Neutral

  • Earth
    Earth

Posted 09 December 2015 - 10:08 AM

I thought it would be based on your risk assessment?

 

 

Yes It would be, but they can help you do the risk assessment



Lelouch_rayne

    Grade - MIFSQN

  • IFSQN Member
  • 160 posts
  • 26 thanks
6
Neutral

  • Earth
    Earth
  • Gender:Not Telling

Posted 09 December 2015 - 10:43 AM

Yes It would be, but they can help you do the risk assessment

Hmmm,,. That would make my job easier, but unfortunately I need it ASAP. making appointment would take time. 



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 09 December 2015 - 02:06 PM

Hi Joan,

 

I’m unclear what level of detail you are seeking.

 

Just to be sure, we are talking about BRC7, right ??

 

Do you mean you are (A) looking for a complete hygiene/cleaning procedures program for low risk/enclosed zones, eg with specific chemical types/everything  etc or (B) only a general layout to illustrate the differences between low/high/etc ?

 

The former (A)  will inevitably depend on details of your product/process.

For the latter (B) can have a look at the attachment below which, i think, is a detailed, general requirements layout of a Food Manufacturing System approx. aligned to BRC6 though probably with some individual "tweaks". The Base/Medium activities sort of relate to your mentioned areas of interest.

 

Attached File  Food Manufacturing System.pdf   1.15MB   317 downloads

 

Alternatively for (B), I expect your basic enclosed/low risk zone requirements will also be probably covered within a GMP system such as detailed in the well-known US/CFR Publication. But their sectors will probably be less specifically aligned to a BRC type format. It depends what you want.

 

The risk assessment element, from a zoning POV, is intended to be self-supplied by the BRC chart. The specific (risk) foci for different zones are quite well detailed in the associated appendix text but i suspect you are less interested in that as compared to an "overall"  solution.


Kind Regards,

 

Charles.C


IzzyP

    Grade - AIFSQN

  • IFSQN Associate
  • 36 posts
  • 16 thanks
7
Neutral

  • Earth
    Earth

Posted 09 December 2015 - 04:33 PM

The TMFS is now on version 6.



Lelouch_rayne

    Grade - MIFSQN

  • IFSQN Member
  • 160 posts
  • 26 thanks
6
Neutral

  • Earth
    Earth
  • Gender:Not Telling

Posted 10 December 2015 - 12:57 AM

Hi Joan,

 

I’m unclear what level of detail you are seeking.

 

Just to be sure, we are talking about BRC7, right ??

 

Do you mean you are (A) looking for a complete hygiene/cleaning procedures program for low risk/enclosed zones, eg with specific chemical types/everything  etc or (B) only a general layout to illustrate the differences between low/high/etc ?

 

The former (A)  will inevitably depend on details of your product/process.

For the latter (B) can have a look at the attachment below which, i think, is a detailed, general requirements layout of a Food Manufacturing System approx. aligned to BRC6 though probably with some individual "tweaks". The Base/Medium activities sort of relate to your mentioned areas of interest.

 

attachicon.gifFood Manufacturing System.pdf

 

Alternatively for (B), I expect your basic enclosed/low risk zone requirements will also be probably covered within a GMP system such as detailed in the well-known US/CFR Publication. But their sectors will probably be less specifically aligned to a BRC type format. It depends what you want.

 

The risk assessment element, from a zoning POV, is intended to be self-supplied by the BRC chart. The specific (risk) foci for different zones are quite well detailed in the associated appendix text but i suspect you are less interested in that as compared to an "overall"  solution.

Hi Charles,

 

Its BRC Version 7 were talking about.

I'm looking for A, but its not necessarily procedures, cleaning frequency, PPE's, etc. would suffice. I used the decision tree to identify the different risk zones but the manual only provide the general approach of hygiene clearance required for each zones which make it a little fuzzy. What if they required some requirements or format that should be followed. Each auditor has different approach so i'm just playing safe.

 

Thanks,

 

Joan



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 10 December 2015 - 01:21 AM

Hi Charles,

 

Its BRC Version 7 were talking about.

I'm looking for A, but its not necessarily procedures, cleaning frequency, PPE's, etc. would suffice. I used the decision tree to identify the different risk zones but the manual only provide the general approach of hygiene clearance required for each zones which make it a little fuzzy. What if they required some requirements or format that should be followed. Each auditor has different approach so i'm just playing safe.

 

Thanks,

 

Joan

Hi Joan,

 

Do you mean you are trying to answer sections such as the red item below as would be appropriate for the Low Risk/Enclosed Product Zones ?

 

2.2 PREREQUISITE PROGRAMMES

CLAUSE REQUIREMENTS

2.2.1 The site shall establish and maintain environmental and operational programmes necessary to create an environment suitable to produce safe and legal food products (prerequisite programmes). As a guide these may include the following, although this is not an exhaustive list:

•  cleaning and sanitising

•  pest control

•  maintenance programmes for equipment and buildings

•  personal hygiene requirements

•  staff  training

•  purchasing

•  transportation arrangements

•  processes to prevent cross-contamination

•  allergen controls.

 

3.4.4 In addition to the internal audit programme there shall be a programme of documented inspections to
ensure that the factory environment and processing equipment is maintained in a suitable condition for
food production. These inspections shall include:
•  hygiene inspections to assess cleaning and housekeeping performance
•  fabrication inspections to identify risks to the product from the building or equipment.
The frequency of these inspections shall be based on risk but will be no less than once per month in
open product areas.

 

 


Kind Regards,

 

Charles.C


Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 10 December 2015 - 04:06 AM

addendum to previous post -

 

Just as an example, a fully worked, "complete" Sanitation [=Hygiene] Program is attached in this post (see ssop list.pdf) -

 

http://www.ifsqn.com...art/#entry32236

 

The (US Seafood) process example given (mix of low risk / high risk zones etc) is now relatively old so that the details will definitely not comply with the current BRC7 high risk zone plus certain requirements for non-High risk zones, but they may reasonably illustrate many of the basic GMP requirements for the non-high zone category / seafood (I didn't check all the content, allergens are one notable omission).

 

The format used for BRC is quite optional. The above example uses a section-by-section style. Many people here prefer, for cleaning, to use a matrix type Master Schedule plan. Numerous examples have been posted on this forum.

 

As you can see the details are likely to be regulation / standard / factory specific although many of the basic "Hygiene" principles are often common to different schemes.

 

One notable difference in current haccp systems is that the scope of the PRPs which at one time were mainly devoted to handling the Hygiene aspect has expanded to include more "process-related" activities some of which might be classified as more typical of QA than Hygiene. Plus the interpretation of some other  topics such as allergens.


Kind Regards,

 

Charles.C




Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users