Jump to content

  • Quick Navigation
Photo

Filter recommendations for steam, compressed air and air handling?

Share this

  • You cannot start a new topic
  • Please log in to reply
6 replies to this topic
- - - - -

Parkz58

    Grade - MIFSQN

  • IFSQN Member
  • 217 posts
  • 65 thanks
28
Excellent

  • United States
    United States
  • Gender:Male
  • Location:San Antonio, TX

Posted 21 July 2016 - 02:45 PM

Greetings,

 

We are setting up a new facility, and need to install a 5 micron filter on our compressed air system, a 5 micron filter on our steam system, and some sort of system on our air handling system (which will pull air from outside through a rooftop unit at 6,000 cfm, then channel it down a 16x16 duct to where it will be used in direct food contact (cooling/drying finished product).

 

Where should I start looking for the above filters?

 

We know the specifications on the compressed air and steam (5 microns), but the air handler for direct food contact has no required specifications...so, what should we do?  We can install a primary filter at the "mouth" of the air handler to block out large contaminants, but I'm thinking we should also have some sort of filtration near the point of use, right?

 

Any help or advice you can offer would be greatly appreciated!

 

Thanks,

 

Brian



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 21 July 2016 - 03:14 PM

Hi Brian,

 

Is the set-up supposed to comply with any particular FS Standard, eg SQF ?

 

In some cases the specifics also relate to the product, eg RTE, and process.


Kind Regards,

 

Charles.C


Parkz58

    Grade - MIFSQN

  • IFSQN Member
  • 217 posts
  • 65 thanks
28
Excellent

  • United States
    United States
  • Gender:Male
  • Location:San Antonio, TX

Posted 21 July 2016 - 03:16 PM

Good point, Charles, I should have specified.

 

We are pursuing SQF Level 2 certification in the near future.

 

We are processing grain products that will NOT be RTE.

 

Oh, and I realized I made a mistake in my initial post...we should be using a 0.01 micron filter for the compressed air.



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 21 July 2016 - 04:15 PM

Hi Brian,

 

Thks for above.

 

Looks like you've been reading the SQF Guidance material. :smile:

 

There are a lot of SQF-related threads on this topic whose attachments illustrate typical "sets" of compresor/filter arrangements, eg -

 

http://www.ifsqn.com...ent/#entry81054
http://www.ifsqn.com...ity/#entry88849
http://www.ifsqn.com...oom/#entry94690
http://www.ifsqn.com...ng/#entry100607


Kind Regards,

 

Charles.C


Karenconstable

    Grade - MIFSQN

  • IFSQN Member
  • 90 posts
  • 38 thanks
11
Good

  • Australia
    Australia
  • Gender:Female

Posted 01 August 2016 - 03:21 AM

Hi Brian,

 

Don't forget that compressed air can contain mineral oil contamination from the compressor itself, as well as contaminants from the outside air.  Mineral oil contamination is relevant to both RTE foods and also to food items like grain that will undergo further processing and 'kill steps'.

 

When looking for solutions, a good place to start is with a compressed air components manufacturer or supplier; their sales guys usually have fantastic expertise and they will have a range of different drying/filtering options for both the plant room and the point of use.  I'm not sure about how it works in your country, but I would be surprised if you couldn't find a couple of companies who would be willing to send experts to visit your plant in person and propose some solutions.   Single use filters installed close to the point of use should be relatively cheap.

 

Karen


Regards,

Karen Constable

 

Food Fraud Prevention (VACCP) Programs | Food Fraud Training |

Consulting | Advisory | Compliance

The Rotten Apple Newsletter

 


Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 01 August 2016 - 05:52 AM

Hi Brian,

 

Don't forget that compressed air can contain mineral oil contamination from the compressor itself, as well as contaminants from the outside air.  Mineral oil contamination is relevant to both RTE foods and also to food items like grain that will undergo further processing and 'kill steps'.

 

When looking for solutions, a good place to start is with a compressed air components manufacturer or supplier; their sales guys usually have fantastic expertise and they will have a range of different drying/filtering options for both the plant room and the point of use.  I'm not sure about how it works in your country, but I would be surprised if you couldn't find a couple of companies who would be willing to send experts to visit your plant in person and propose some solutions.   Single use filters installed close to the point of use should be relatively cheap.

 

Karen

Hi Karen,

 

I don't disagree with the Principle of yr comments but, based on some previous threads (and some FS Standards), a likely result  of a salesman's involvement may be a sterile filtration capability.  Win-Win ?


Kind Regards,

 

Charles.C


Parkz58

    Grade - MIFSQN

  • IFSQN Member
  • 217 posts
  • 65 thanks
28
Excellent

  • United States
    United States
  • Gender:Male
  • Location:San Antonio, TX

Posted 01 August 2016 - 01:33 PM

Thanks to all of you for your feedback - should be helpful!





Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users