Jump to content

  • Quick Navigation
Photo

Breakroom Sink 11.3.10.2

Share this

  • You cannot start a new topic
  • Please log in to reply
8 replies to this topic

scrater

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 0 thanks
0
Neutral

  • United States
    United States

Posted 10 October 2016 - 06:52 PM

Our employee break room has one sink and it is used by employees to wash their dishes during their break, and they do wash hands there, although there are separate men's and women's restrooms on either side of the sink.  This has been the same setup for years, but on our recent inspection we were given a minor because we had hand soap and single use towels there in addition to the dish soap.  I don't see anywhere in the code specifically addressing separate sinks for hand washing and utensils in the employee break room.  We are working on the CAR for this.  Will we be OK removing the hand soap and designating it for dishes only?  Does anyone have recommendations or experience with this?  I really don't want to have to put in a second sink.  



Slab

    Grade - SIFSQN

  • IFSQN Senior
  • 438 posts
  • 208 thanks
105
Excellent

  • United States
    United States
  • Gender:Male
  • Location:The Heel of the Boot
  • Interests:Reading (history, science fiction), Photography, drawing,food safety, metrology, TQM, hoplology, etc.

Posted 11 October 2016 - 05:50 AM

Hi, Scrater;

 

I would ask your auditor exactly what made this non-compliant specifically from the code? Nor do I see anything in the code which would warrant a non-conformance. The auditing body has to cite section of code in regards to any non-conformance, and provide verbatim auditor results of observation. Perhaps if you could provide that it would help.

 

As long as you can demonstrate that your hand washing stations (production prep) are separate from break areas with a 'sufficient barrier' (e.g. plant entrance door) you are fine.


Food Safety News  Marine Stewardship Council

 

"Some people freak out when they see small vertebra in their pasta" ~ Chef John


Thanked by 1 Member:

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 11 October 2016 - 06:30 AM

Our employee break room has one sink and it is used by employees to wash their dishes during their break, and they do wash hands there, although there are separate men's and women's restrooms on either side of the sink.  This has been the same setup for years, but on our recent inspection we were given a minor because we had hand soap and single use towels there in addition to the dish soap.  I don't see anywhere in the code specifically addressing separate sinks for hand washing and utensils in the employee break room.  We are working on the CAR for this.  Will we be OK removing the hand soap and designating it for dishes only?  Does anyone have recommendations or experience with this?  I really don't want to have to put in a second sink.  

 

Hi scrater,

 

Yr business activity is unmentioned,

 

i note that SQF refers to this as a lunch room. Period. I see no mention of associated toilet facilities or a sink for other than washing utensils (para iii).

 

I'm unclear what you mean by "separate". Physically separated?  i got the impression from yr OP that the toilets are directly adjacent to the lunch area's designated handwashing sink, the latter currently used for both purposes. This IMO would be basically anti-GMP on it's own, regardless of soap-related aspects.

 

From SQF Guidance requirements -

 

•      Hand wash signage is available at the exit of the lunch facilities;
•      Hand wash signage at the exit of lunch facilities is in appropriate languages.

i deduce this indicates SQF's viewpoint although i agree the Guidance is not directly auditable.

 

One or 2-sink auditorial issues similar, i think, to yr comment are variously discussed here for USDA-regulated processing. Conclusions seem to favour the latter. In my personal opinion handwashing sinks should not be co-located in the first place.

 

The closing opinion in previous post looks logical to me although yr business is unknown which might be a caveat.


Kind Regards,

 

Charles.C


Thanked by 1 Member:

Gerard H.

    Grade - SIFSQN

  • IFSQN Senior
  • 411 posts
  • 131 thanks
44
Excellent

  • France
    France
  • Gender:Male

Posted 11 October 2016 - 12:57 PM

Dear Scrater,

 

Yes, it's a good idea to remove the hand soap. Than the sink will be for 1 purpose only, washing dishes. It's will be more clear for everybody, that there are sinks for the dishes and for hand washing. Advantages of doing so:

  • More clearness and hygiene
  • You will improve the behaviour of the people, doing the things automatically right
  • It will have its reflection in the production area --> no more mixing of the functionality of sinks

Looking to the advantages, when there is room for a small investment, I should opt for a 2nd sink dedicated to handwashing. That allows people to wash their hands, if necessary.

 

I hope to have informed you sufficiently. Good luck with the solution of the CAR.

 

Kind regards,

 

Gerard Heerkens



Thanked by 1 Member:

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 11 October 2016 - 01:08 PM

Dear Scrater,

 

Yes, it's a good idea to remove the hand soap. Than the sink will be for 1 purpose only, washing dishes. It's will be more clear for everybody, that there are sinks for the dishes and for hand washing. Advantages of doing so:

  • More clearness and hygiene
  • You will improve the behaviour of the people, doing the things automatically right
  • It will have its reflection in the production area --> no more mixing of the functionality of sinks

Looking to the advantages, when there is room for a small investment, I should opt for a 2nd sink dedicated to handwashing. That allows people to wash their hands, if necessary.

 

I hope to have informed you sufficiently. Good luck with the solution of the CAR.

 

Kind regards,

 

Gerard Heerkens

 

Hi Gerard,

 

Assuming you mean in the same location. this seems directly opposite to the SQF Guidance ?.


Kind Regards,

 

Charles.C


Thanked by 1 Member:

Gerard H.

    Grade - SIFSQN

  • IFSQN Senior
  • 411 posts
  • 131 thanks
44
Excellent

  • France
    France
  • Gender:Male

Posted 11 October 2016 - 01:12 PM

Dear Charles C.

 

Thanks for your comment. In that case 1 sink and for 1 purpose.

 

Kind regards,

 

Gerard H.



Thanked by 1 Member:

Ryan M.

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,327 posts
  • 479 thanks
290
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Birmingham, AL
  • Interests:Reading, crosswords, passionate discussions, laughing at US politics.

Posted 11 October 2016 - 09:37 PM

I have to make an assumption here, maybe I'm wrong, but you don't have any other handwashing sinks prior to entering production areas from the break room?  If not, then I can see why the auditor pointed this out.  I'm also assuming the toilets are not open to the breakroom, just adjacent to it on either side.  If open, then well that's an entirely different story.

 

So, if my assumption is correct best you to put in a separate sink for handwashing just prior to production/processing area.  With that, the sink in the break room is a moot point so long as the procedure is to use the sink just prior to production/processing for handwashing.



Thanked by 1 Member:

SQFconsultant

    SQFconsultant

  • IFSQN Fellow
  • 4,632 posts
  • 1135 thanks
1,126
Excellent

  • United States
    United States
  • Gender:Male
  • Interests:Just when I thought I was out - They pulled me back in!!!

Posted 15 October 2016 - 11:14 PM

So you had some soap and hand towels as an aside to the real purpose of the sink which I assume is used to clean up dishes, employee food containers, etc. So as an Auditor you look at this and you mark it off because the sink area does not qualify as a hand-washing station under the code of SQF. That is why you were marked up.  


All the Best,

 

All Rights Reserved,

Without Prejudice,

Glenn Oster.

Glenn Oster Consulting, LLC -

SQF System Development | Internal Auditor Training | eConsultant

Martha's Vineyard Island, MA - Restored Republic

http://www.GCEMVI.XYZ

http://www.GlennOster.com

 


Thanked by 1 Member:

QKEL

    Grade - Active

  • IFSQN Active
  • 19 posts
  • 1 thanks
0
Neutral

  • Earth
    Earth

Posted 01 November 2016 - 01:01 PM

Hello, 

 

We have designated hand sinks directly inside the production rooms that upon entering employees are trained to follow our handwashing procedures before starting or returning to work.  We had a review for SQF level II project status

and our consultant advised production sinks are fine.  However, our breakroom sink should have posted to wash hands before returning to work (we only had handwashing procedure posted) but he advised although not having a sink from breakroom to warehouse is not a non-conformance for SQF, he recommended we put one in.  Since we wash dishes in the breakroom and sinks are the furthest away from the door to the warehouse, I would rather install a sink immediately outside the breakroom to address handwashing mainly for warehouse employees.  But then would have all employees wash hands upon exiting breakroom to warehouse and then production employees wash hands again upon entering production rooms.  Trying to monitor Warehouse employees wash their hands exiting breakroom and production employees don't but wash their hands entering production areas would be difficult.  We have older buildings and the setup is challenging for setting up proper flow of employees.  To say the least.

 

Just want to say again, how much I greatly appreciate this forum and all that share their knowledge, challenges, experiences and successes!





Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users