Jump to content

  • Quick Navigation
Photo

UV Knife Sterilization

Share this

  • You cannot start a new topic
  • Please log in to reply
12 replies to this topic

Guitardr85

    Grade - AIFSQN

  • IFSQN Associate
  • 49 posts
  • 4 thanks
3
Neutral

  • United States
    United States
  • Gender:Male
  • Location:Chicago, IL
  • Interests:HACCP, HARPC, SQF Practitioner, FSMA, Food Safety Culture, Reading, Creative Writing, Guitars, Piano, Music, Art, Wanderlust, Traveling.

Posted 21 October 2016 - 02:22 PM

Happy Friday Everyone!

 

I am currently looking into a more effective means to properly sanitize and store food contact knives we use in our dairy packaging facility.  I have been leaning towards UV sterilization cabinets to solve both sanitary storage and sterilization factors.  I would be interested to hear if anyone has any prior or current experience with UV sanitization/sterilization (specifically whether or not it works (4 or 5-log reduction), equipment upkeep and maintenance costs, etc.

 

All opinions are welcome!!!



J. O. L. III

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 1 thanks
0
Neutral

  • Philippines
    Philippines

Posted 22 October 2016 - 01:57 PM

There are only a few references about the use of UV in sterilizing food and food processing equipment. But I believe there are already a number of companies using the technology.

 

As a general rule of thumb you have to consider the possible amount of survivor microorganisms on your tool to be UV sterilized. Next to this is the lamp to be used which should emit the right value of UV rays to steilize the tools. If you use a combination of high UV amount and long exposure time, i think the system will be effective.

 

One of the internationally known probiotic beverage manufacturer makes use of UV to disinfect their manufacturing lines. UV lights are turned ON after they shutdown the operation.

 

Hope this helps even a little.   :gleam:



Thanked by 1 Member:

Ryan M.

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,320 posts
  • 479 thanks
289
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Birmingham, AL
  • Interests:Reading, crosswords, passionate discussions, laughing at US politics.

Posted 31 October 2016 - 09:35 PM

I'm curious...are these knives used on the raw side or pasteurized side or both?  If on the raw side, why even bother?  I would rather spend time, resources, and energy in other areas.  Just make sure personnel are cleaning the knives or storing them in sanitizer.  If on pasteurized side and product contact (makes me wonder why kind of dairy operation? Cheese?) then the UV could work well, but again wouldn't it only be effective if the knife was clean to begin with?  You can't sterilize or sanitize a dirty surface, even with UV.  If that's the case, wouldn't you just use a chemical sanitizer?

 

What kind of knives are these?



Guitardr85

    Grade - AIFSQN

  • IFSQN Associate
  • 49 posts
  • 4 thanks
3
Neutral

  • United States
    United States
  • Gender:Male
  • Location:Chicago, IL
  • Interests:HACCP, HARPC, SQF Practitioner, FSMA, Food Safety Culture, Reading, Creative Writing, Guitars, Piano, Music, Art, Wanderlust, Traveling.

Posted 01 November 2016 - 04:09 PM

rmills06...Thanks for the response!  In this particular room we only repackage/grind/shred bulk RTE cheeses.  Knives are carefully used to remove cryovac packaging on bulk cheese wheels/blocked which are then dumped into food contact bins (the cheese not the knives :rofl2: ).  

 

My question was only in regards to the effectiveness of sanitization on already washed stainless knives.  Our process is already to wash, rinse, and sanitize all product contact knives day of use, I was just curious as to the effectiveness of UV as a method to mitigate chemical costs as well as help with storage issues.  Have you ever used any of these units?  I am curious if anyone has ever validated their usefulness as a sanitizing method. 

 

Thanks Again!!!



Ryan M.

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,320 posts
  • 479 thanks
289
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Birmingham, AL
  • Interests:Reading, crosswords, passionate discussions, laughing at US politics.

Posted 01 November 2016 - 04:55 PM

I have never used them.  Only have used UV for bottled water treatment.  As another said it can be effective, but it is best used with uniform sized items you are sterilizing.  I think it will work for your application, but of course you will have to work with the manufacturer to validate it for the knives.  Very interesting!

 

 

rmills06...Thanks for the response!  In this particular room we only repackage/grind/shred bulk RTE cheeses.  Knives are carefully used to remove cryovac packaging on bulk cheese wheels/blocked which are then dumped into food contact bins (the cheese not the knives :rofl2: ).  

 

My question was only in regards to the effectiveness of sanitization on already washed stainless knives.  Our process is already to wash, rinse, and sanitize all product contact knives day of use, I was just curious as to the effectiveness of UV as a method to mitigate chemical costs as well as help with storage issues.  Have you ever used any of these units?  I am curious if anyone has ever validated their usefulness as a sanitizing method. 

 

Thanks Again!!!



Scampi

    Fellow

  • IFSQN Fellow
  • 5,425 posts
  • 1503 thanks
1,513
Excellent

  • Canada
    Canada
  • Gender:Not Telling

Posted 01 November 2016 - 06:41 PM

Why UV v.s. an autoclave?


Please stop referring to me as Sir/sirs


Guitardr85

    Grade - AIFSQN

  • IFSQN Associate
  • 49 posts
  • 4 thanks
3
Neutral

  • United States
    United States
  • Gender:Male
  • Location:Chicago, IL
  • Interests:HACCP, HARPC, SQF Practitioner, FSMA, Food Safety Culture, Reading, Creative Writing, Guitars, Piano, Music, Art, Wanderlust, Traveling.

Posted 01 November 2016 - 07:04 PM

Thanks rmills!

 

Scampi...From my limited research it seems as though cost ($/in3) is lower for UV, though I may be completely off base here (plus the thought of running another steam or water line into this particular dry processing area is a little scary to me  :ejut: )



Scampi

    Fellow

  • IFSQN Fellow
  • 5,425 posts
  • 1503 thanks
1,513
Excellent

  • Canada
    Canada
  • Gender:Not Telling

Posted 01 November 2016 - 07:19 PM

Yes, $$ and moisture is a concern for sure. A heat only autoclave might be a better option.....how will the UV touch the underside of the knife if it's sitting on a tray?


Please stop referring to me as Sir/sirs


Ryan M.

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,320 posts
  • 479 thanks
289
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Birmingham, AL
  • Interests:Reading, crosswords, passionate discussions, laughing at US politics.

Posted 01 November 2016 - 10:30 PM

Not sure what your budget is, but a Tuttnauer benchtop autoclave can be had for around $4,000 or $5,000 USD.  They are easy to use, hold up well, and best of all no lines need to be run.  It recaptures the steam and condenses back to use the water again.

 

Drawbacks, smaller size (but should be fine for knives), have to empty and maintain water tank every so often, some automation, but manual user will be needed for each part of the cycle.



Thanked by 1 Member:

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 02 November 2016 - 02:24 AM

Hi Guitardr,

 

There is perhaps some necessity to distinguish between Sanitation and Sterilization.

 

What is yr criterion/criteria for an adequately "de-microbialized" knife for yr specific application?

 

I don't quite get the interest in sterilized knives, sounds more like a hospital. But perhaps you do have very exacting cheese requirements ?

 

FWIW micro.labs use a hot-air oven for sterilization of metal items, my guess less expensive than above techniques but does require time for a batch. Cheap manual autoclaves also exist if you are really so inclined and don't mind a somewhat steamy environment / getting yr hands a bit warm. :smile:

 

http://scienceinthet...org/autoclaves/


Kind Regards,

 

Charles.C


Kay Airey

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 0 thanks
0
Neutral

  • New Zealand
    New Zealand

Posted 02 November 2016 - 09:37 PM

Hi.  I would suggest you look at a new product in the marketplace called Cleanslate.  We have been completing some trials and are very impressed with the results of this equipment in reducing pathogen counts in 30 seconds.  Originally set up for the medical industry but diversifying into food manufacturing industry.

 

http://www.cleanslateuv.com/

 

 



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 02 November 2016 - 11:19 PM

Hi.  I would suggest you look at a new product in the marketplace called Cleanslate.  We have been completing some trials and are very impressed with the results of this equipment in reducing pathogen counts in 30 seconds.  Originally set up for the medical industry but diversifying into food manufacturing industry.

 

http://www.cleanslateuv.com/

 

Appears to be primarily designed for "sanitizing" and "disinfecting" in hospitals.


Kind Regards,

 

Charles.C


Guitardr85

    Grade - AIFSQN

  • IFSQN Associate
  • 49 posts
  • 4 thanks
3
Neutral

  • United States
    United States
  • Gender:Male
  • Location:Chicago, IL
  • Interests:HACCP, HARPC, SQF Practitioner, FSMA, Food Safety Culture, Reading, Creative Writing, Guitars, Piano, Music, Art, Wanderlust, Traveling.

Posted 22 December 2016 - 04:01 PM

Sorry for coming back late to the party and thanks for all the previous responses!!! 

 

I guess i should explain our process a little more...

 

We use stainless steel knives to remove cryovac wrapping from our bulk cheese products prior to sending them into a formulation and "chop" area.  This is critical as this is VERY upstream in our process and the company has, in the past, had issues with elevated micro levels on these items.  My thought process was two fold in that I was curious if UV was cost effective over the long term (as a wall mounted cabinet unit can be had for about $1K)  and this also solves an issue with storage location and inventory of our knives.  For me sanitation vs. sterilization is not really an issue (especially if i am getting into sterilization levels at a comparable $$ to our current process).

 

Additionally, I just also thought this was neat!!  :sleazy:





Share this


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users