Jump to content

  • Quick Navigation
Photo

Forklift Inspection Records

Share this

  • You cannot start a new topic
  • Please log in to reply
4 replies to this topic

Elleflores619

    Grade - Active

  • IFSQN Active
  • 19 posts
  • 2 thanks
1
Neutral

  • Earth
    Earth

Posted 17 August 2017 - 07:56 PM

Good day all,

I was wondering if anywhere in the BRC Guide states how often Forklift Inspections need to be done and do I have to maintain those records ?

Please advise.

 

Thank you,

 

Elle



Breezysharp

    Grade - Active

  • IFSQN Active
  • 4 posts
  • 0 thanks
0
Neutral

  • Earth
    Earth

Posted 18 August 2017 - 01:30 AM

Well, I will know the answer soon myself. But ask ur self a few questions first. Does the fork lift have glass, hard plastic, ceramic etc? More than likely yes.

 

Next, what do we do with items that have glass, hard plastics etc? Put them on a register.

 

Next we need to do a risk assessment, chance the glasses, hard plastics ect may break? Low, medium or high? What's the potential it would get in to product and what would happen (significant risk damage) if it did get in to product?

 

The answer to those questions will help determine the frequency of that particular inspection. ( not all things on that register will require the same frequency of inspections as some things are low risk and some are high) so I would say yes, the brc has a control of foreign material reqirment which would require a glass and hard plastic register by default. It may not state how to satisfy the clauses specifically, but a register with a determined frequency would satisfy it.

 

I'm sorry, very tired n not thinking very clear. Hope this helps. U can always call xxx. I'm just learning myself, I'm haccp certified, pcqi certified and just went through brc training. Keep at it! No dumb questions with this stuff, it can be tricky! But it becomes a lilll more clear as each day passes.


Edited by Charles.C, 18 August 2017 - 09:41 PM.
formatted


Lissa77

    Grade - Active

  • IFSQN Active
  • 7 posts
  • 0 thanks
0
Neutral

  • United States
    United States

Posted 10 January 2018 - 10:36 AM

So, According to you What should be real standards for Forklift Inspections.



TimGoss

    Grade - Active

  • IFSQN Active
  • 21 posts
  • 4 thanks
3
Neutral

  • United States
    United States

Posted 10 January 2018 - 01:43 PM

Good morning, I know OSHA recommends a forklift be inspected daily in relation to safety. Your country might have a similar employee safety guideline. I simply took our "Forklift Safety Checklist" and added in a few lines like "no broken glass or plastic which could cause food adulteration" (I can't remember the exact wording). This way you can knock out both employee safety and food safety for your forklifts (or any powered industrial vehicle) on one document.



Timwoodbag

    Grade - MIFSQN

  • IFSQN Member
  • 210 posts
  • 68 thanks
33
Excellent

  • United States
    United States
  • Gender:Male

Posted 10 January 2018 - 02:29 PM

Good morning, I know OSHA recommends a forklift be inspected daily in relation to safety. Your country might have a similar employee safety guideline. I simply took our "Forklift Safety Checklist" and added in a few lines like "no broken glass or plastic which could cause food adulteration" (I can't remember the exact wording). This way you can knock out both employee safety and food safety for your forklifts (or any powered industrial vehicle) on one document.

Exactly this.  Your Insurance company would appreciate it too, assuming your drivers have certification.  

 

I put my forklifts on my daily pre-op for food safety, and the drivers do a separate sheet that they've been using for 20 years.  My forklifts are also on a regular cleaning schedule (weekly), and my monthly glass and plastic inventory.  Never been questioned about it by SQF auditors before.





Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users