Jump to content

  • Quick Navigation
Photo

Metal detection equipment in canned seafood production

Share this

  • You cannot start a new topic
  • Please log in to reply
7 replies to this topic

Esther

    Member

  • IFSQN Member
  • 232 posts
  • 17 thanks
2
Neutral

  • Spain
    Spain
  • Gender:Female
  • Location:La Coruña- Spain
  • Interests:Local and international food law; food industrial processes; food safety management systems;GMP; lean manufacturing; share knowledge

Posted 08 April 2008 - 07:33 PM

Hello all

I had a disccusion recently with the quality manager of a canning industry and I would like to share it with you.

We were tlaking about the need of a metal detection equipment in a canned seafood industry? Should the answer be " NO" ? Should the answer be " go for a X-ray equipment" ??

I would like to know if some of you have seen this kind of equidment in a canned seafood industry ( squid, octopus, mussel ). If so, at what step is it placed ?
If not, what kind of risk assesment would you expect to see as an auditor ?

Thank very much for all your comments


Esther



Simon

    IFSQN...it's My Life

  • IFSQN Admin
  • 12,826 posts
  • 1363 thanks
880
Excellent

  • United Kingdom
    United Kingdom
  • Gender:Male
  • Location:Manchester
  • Interests:Married to Michelle, Father of three boys (Oliver, Jacob and Louis). I enjoy cycling, walking and travelling, watching sport, especially football and Manchester United. Oh and I love food and beer and wine.

Posted 10 April 2008 - 07:29 AM

Anyone care to comment on Esther's points?


Get FREE bitesize education with IFSQN webinar recordings.
 
Download this handy excel for desktop access to over 180 Food Safety Friday's webinar recordings.
https://www.ifsqn.com/fsf/Free%20Food%20Safety%20Videos.xlsx

 
Check out IFSQN’s extensive library of FREE food safety videos
https://www.ifsqn.com/food_safety_videos.html


Charles Chew

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,178 posts
  • 54 thanks
15
Good

  • Malaysia
    Malaysia
  • Gender:Male
  • Location:Malaysia
  • Interests:Food, food and food!

Posted 10 April 2008 - 09:54 AM

Clearly, the potential risk of metal contaminant introduction should really be addressed prior to the can seaming rather than after the retort process. IMO, correct determination of CCP should therefore be addressed otherwise the HACCP Plan is incorrect.


Cheers,
Charles Chew
www.naturalmajor.com

GMO

    Grade - FIFSQN

  • IFSQN Fellow
  • 2,791 posts
  • 721 thanks
225
Excellent

  • United Kingdom
    United Kingdom

Posted 11 April 2008 - 05:01 AM

I suppose it depends what your can is made of and where the risks are from. You can detect ferrous metal in aluminium but you won't detect any other metals (waste of time if your risks come from aluminium or stainless steel.) Will x-rays penetrate? If so, I suspect you will need a very high powered machine.

I think as Charles said, it's going to have to be before canning. You might need controls in the canning stage to prevent metal contamination there?



cazyncymru

    Grade - FIFSQN

  • Banned
  • 1,604 posts
  • 341 thanks
130
Excellent

  • Earth
    Earth
  • Gender:Male

Posted 11 April 2008 - 03:08 PM

I have worked extensively in the canning industry, canning dairy desserts, and we did not have metal detection. However all cans were inverted and blown with compressed air immediately prior to filling.

The distance between the filling head and seamer was covered to prevent any ingress of foreign material.

We used seaming as the CCP as an inadequate seam could be potentially allow the ingress of bateria during the retorting process.

Also the amount of chlorine in the water was a CCP

The only time that we had a complaint from a customer regarding "metal shavings" in a can was when someone returned a spiral that had obviously come off the tin opener when an easy open end (ring pull) had been opened with a tin opener!

c x



chrnyd

    Grade - Active

  • IFSQN Active
  • 6 posts
  • 0 thanks
0
Neutral

  • Norway
    Norway
  • Gender:Male
  • Location:Elverum, Norway

Posted 06 May 2008 - 09:18 AM

I find the topic interesting as I have production of canned food in my factory.

From my point of view the big question is wether you have control of your rawmaterials or not. If the risk of foreign bodies is in the hands of a supplier I would most definatly have x-ray detection. If you supply all rawmaterials yourselves you can find other solutions.

Our production is the kind where we buy different components and put them together in a can. We experiance quite a lot of complaints from customers on foreign bodies, and find that most of them come in with our rawmaterials. Of course only some of them are possible to detect with x-ray detection (the foreign body must have a density greater than your product to be detevtable), but one complaint is one to many.... (finding pay pabck in the investment is difficult).

NB: the x-ray equipment exsists. I was in Cambridge, UK, just after Easter and tested Mettler Toledo's machine, and it was quite impressive. www.mt.com/safeline-xray
The machine for cans is called CanCheK. I will fight to get it on the investment budget for 2009. Another supplier of x-ray is Ishida (Italian company).

Attached Files

  • Attached File  mt.pdf   1.6MB   84 downloads


Product Inspection

    Grade - Active

  • IFSQN Active
  • 1 posts
  • 1 thanks
0
Neutral

  • Earth
    Earth
  • Gender:Male

Posted 22 June 2008 - 04:27 PM

Hi all,

I just wanted to add some notes to this intersting discussion. To be up front and declare an interest - as one of the world's largest X-ray system suppliers many of the contaminants we have seen in cans comes from the incoming raw materials.

We have run some extensive on site trials using an Eagle Tall X-ray from my company; Smiths Detection, Product Inspection Division - www.smithsdetectionpid.com

For canning applications - alongside contaminant detection one added value we see is that the system can be used as a high speed checkweigher - before the retort and checking dry ingredients. The checkweighing uses the X-ray image to calculate the mass from the image. There are no moving parts so speeds can be upto 800 cans/minute and the cans can be literally touching. The results we have seen are better than +/- 0.5g for repeatable accuracy.

Stainless steel detection is from 0.8mm at 50% Probablity of Detection (POD) to 1.0mm stainless steel at 100% POD. In addition the systems also find stone down to 2.5mm (this depends on the density of course) and glass at similar levels (inside steel or alu cans). We also have a QuadView system, a four beam X-ray system for finding glass shards in glass containers, this of particular interest to baby food processors.

Smiths Detection has direct PID offices in the US and the UK where we have demonstration systems avalailable.

Attached Files


Best regards,

Terry

Thanked by 1 Member:
Poulami

Simon

    IFSQN...it's My Life

  • IFSQN Admin
  • 12,826 posts
  • 1363 thanks
880
Excellent

  • United Kingdom
    United Kingdom
  • Gender:Male
  • Location:Manchester
  • Interests:Married to Michelle, Father of three boys (Oliver, Jacob and Louis). I enjoy cycling, walking and travelling, watching sport, especially football and Manchester United. Oh and I love food and beer and wine.

Posted 24 June 2008 - 07:15 AM

Thanks PI, it adds some balance to the MT information.

Welcome to the forums.

Regards,
Simon


Get FREE bitesize education with IFSQN webinar recordings.
 
Download this handy excel for desktop access to over 180 Food Safety Friday's webinar recordings.
https://www.ifsqn.com/fsf/Free%20Food%20Safety%20Videos.xlsx

 
Check out IFSQN’s extensive library of FREE food safety videos
https://www.ifsqn.com/food_safety_videos.html




Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users