Jump to content

  • Quick Navigation
Photo

Is it acceptable to have drums and barrels on the floor?

Share this

  • You cannot start a new topic
  • Please log in to reply
5 replies to this topic

jportz

    Grade - MIFSQN

  • IFSQN Member
  • 88 posts
  • 3 thanks
3
Neutral

  • United States
    United States

Posted 30 March 2017 - 05:07 PM

We work in a vegetable processing plant that uses wooden pallets.  The way our lines are set up, the wooden pallets don't fit under the end of the lines with the fibre drums and barrels we use.  All barrels and drums contain food grade bags inside of them which the product is cut into.  Is it acceptable to have these drums and barrels sitting on the floor or do they have to be up off the floor?  It is my understanding they have to be on the floor but, employees and management are questioning this.

 

Thank You,



FurFarmandFork

    Food Safety Consultant, Production Supervisor

  • IFSQN Fellow
  • 1,264 posts
  • 590 thanks
206
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Oregon, USA

Posted 30 March 2017 - 06:14 PM

When in doubt, write a formal risk assessment to evaluate the actual risk to product. You can do whatever you want if you can prove that other programs you have in place and the way you handle the barrels won't constitute a risk to product.


Austin Bouck
Owner/Consultant at Fur, Farm, and Fork.
Consulting for companies needing effective, lean food safety systems and solutions.

Subscribe to the blog at furfarmandfork.com for food safety research, insights, and analysis.

Ryan M.

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,327 posts
  • 479 thanks
290
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Birmingham, AL
  • Interests:Reading, crosswords, passionate discussions, laughing at US politics.

Posted 05 April 2017 - 02:32 PM

The real question is how are the drums handled at your customers.  In my previous life we probably used your products....we would man handle the drums and grip them from the bottom at times when pouring/dumping the ingredient into our kettles.

 

My concern would be listeria.  I'm assuming your packaging environment is wet?


  • GrumpyJimmy likes this

jportz

    Grade - MIFSQN

  • IFSQN Member
  • 88 posts
  • 3 thanks
3
Neutral

  • United States
    United States

Posted 06 April 2017 - 02:35 AM

Yes our packaging environment is wet and we do environmental swabs for listeria.  We have had 3 positive's.  I'm not sure how I could even do a risk assessment on drums and barrels on the floor.  I have to do most of the work and figuring out by myself since we are a small company and I don't have much help.  It would be easiest if we don't have them on the floor but, management is fighting me on it and production.  We use re-useable plastic barrels with bag liners which are washed on the floor before use.  Under the dicer's there is not enough room to use green grating under the barrels and drums to keep them off the floor.  Once the drums are full they are rolled across the floor and placed on wooden pallets.  We don't use plastic pallets because management and supervisors say the drums and barrels will slide off because of the wet environment.  We do have a pallet sanitation procedure in place because of listeria being on pallets.  Pallets are swabbed as part of our pathogen monitoring program.



Michelle Grace Astorga

    Grade - AIFSQN

  • IFSQN Associate
  • 32 posts
  • 3 thanks
0
Neutral

  • Philippines
    Philippines

Posted 06 April 2017 - 03:02 AM

We also use drums as secondary packaging and we place it on top of plastic pallets. However, in times where pallets are not allowed or does not fit, we still use floor boards for these drums, to ensure that the drums do not lay directly on the floor.



Ryan M.

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,327 posts
  • 479 thanks
290
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Birmingham, AL
  • Interests:Reading, crosswords, passionate discussions, laughing at US politics.

Posted 06 April 2017 - 11:13 PM

I know tough sledding uphil but sooner or later you will run into a problem with current practices and having listeria come back positive on flor samples.

Can the end of the conveyors be raised?

The plastic pallets may be slippery when wet, but if we are talking 400 lb drums? Not likely. I'm assuming those drums get secured somehow as well on the pallet? Additionally, you could put the wood pallet on the plastic pallet, but will be further challenged with the drum height.





Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users