Jump to content

  • Quick Navigation
Photo

Is it ok to have fans in the production area?

Share this

  • You cannot start a new topic
  • Please log in to reply
11 replies to this topic

Padfoot

    Grade - MIFSQN

  • IFSQN Member
  • 97 posts
  • 6 thanks
14
Good

  • United States
    United States
  • Gender:Male
  • Location:Dallas, TX

Posted 29 May 2019 - 05:52 PM

hello, 

The temperature in my facility can sometimes get pretty high. we are not allowing employees to wear shorts under their smocks so the question of having fans for the employees came up. Will this be an issue during an SQF audit? will maintenance on our fans weekly and air sampling be enough to support having fans in the production floor? 


Edited by alemv15, 29 May 2019 - 05:52 PM.


Thanked by 1 Member:
Lisa Nicely

AW1488

    Grade - AIFSQN

  • IFSQN Associate
  • 31 posts
  • 8 thanks
2
Neutral

  • United States
    United States

Posted 29 May 2019 - 07:18 PM

Will the fans be near open product or only in closed product areas?  We had fans but only in areas where product wasn't exposed.  And we bought big filters to put over top of them.  We also only allowed them during summer when a certain temperature was reached so depending on when your audit is then it may not be an issue for you.



Thanked by 2 Members:
Lisa Nicely , alemv15

SQFconsultant

    SQFconsultant

  • IFSQN Fellow
  • 4,632 posts
  • 1135 thanks
1,126
Excellent

  • United States
    United States
  • Gender:Male
  • Interests:Just when I thought I was out - They pulled me back in!!!

Posted 29 May 2019 - 07:33 PM

As a former SQF Auditor the first item that may come up will be - why is the ventilation system inadequate, have you done a documented risk analysis for using the fans, are the fans made of appropiate materials, the position of them blowing, are they only blowing air and not particles, etc - are they are on the sanitation list, etc.


  • Prabindas k and Padfoot like this

All the Best,

 

All Rights Reserved,

Without Prejudice,

Glenn Oster.

Glenn Oster Consulting, LLC -

SQF System Development | Internal Auditor Training | eConsultant

Martha's Vineyard Island, MA - Restored Republic

http://www.GCEMVI.XYZ

http://www.GlennOster.com

 


Thanked by 2 Members:
Lisa Nicely , alemv15

majoy

    Grade - MIFSQN

  • IFSQN Member
  • 243 posts
  • 92 thanks
63
Excellent

  • Canada
    Canada
  • Gender:Female

Posted 29 May 2019 - 07:48 PM

What are your products?

 

We have a bakery area and during summer time, temperature in the area gets too hot, we have big industrial stand up fans that the employee can turn on during those days. There is SSOP for the fans, inspection during pre-op etc.


  • Padfoot likes this

"Whatever you do, do it well..." - Walt Disney


Thanked by 1 Member:
alemv15

Padfoot

    Grade - MIFSQN

  • IFSQN Member
  • 97 posts
  • 6 thanks
14
Good

  • United States
    United States
  • Gender:Male
  • Location:Dallas, TX

Posted 29 May 2019 - 08:03 PM

Will the fans be near open product or only in closed product areas?  We had fans but only in areas where product wasn't exposed.  And we bought big filters to put over top of them.  We also only allowed them during summer when a certain temperature was reached so depending on when your audit is then it may not be an issue for you.

what kind of filters?



Padfoot

    Grade - MIFSQN

  • IFSQN Member
  • 97 posts
  • 6 thanks
14
Good

  • United States
    United States
  • Gender:Male
  • Location:Dallas, TX

Posted 29 May 2019 - 08:06 PM

As a former SQF Auditor the first item that may come up will be - why is the ventilation system inadequate, have you done a documented risk analysis for using the fans, are the fans made of appropiate materials, the position of them blowing, are they only blowing air and not particles, etc - are they are on the sanitation list, etc.

we have not set up the fans yet. If we end up doing them and keep them away from blowing towards the product as well as have a documented risk assesment with regular cleaning and air sampling would you have accepted them? 



Padfoot

    Grade - MIFSQN

  • IFSQN Member
  • 97 posts
  • 6 thanks
14
Good

  • United States
    United States
  • Gender:Male
  • Location:Dallas, TX

Posted 29 May 2019 - 08:11 PM

What are your products?

 

We have a bakery area and during summer time, temperature in the area gets too hot, we have big industrial stand up fans that the employee can turn on during those days. There is SSOP for the fans, inspection during pre-op etc.

same as yours, It's a bakery for bread. are they cleaned daily? 



majoy

    Grade - MIFSQN

  • IFSQN Member
  • 243 posts
  • 92 thanks
63
Excellent

  • Canada
    Canada
  • Gender:Female

Posted 30 May 2019 - 02:17 PM

Not daily. There is a monitoring procedure for it when its used, its checked off during pre-op.

 

Cleaning is weekly as its when we saw that the dirt starts to accumulate.


"Whatever you do, do it well..." - Walt Disney


Thanked by 1 Member:
Lisa Nicely

lnahokie

    Grade - Active

  • IFSQN Associate
  • 10 posts
  • 1 thanks
0
Neutral

  • United States
    United States
  • Gender:Female

Posted 10 March 2020 - 08:51 PM

Will the fans be near open product or only in closed product areas?  We had fans but only in areas where product wasn't exposed.  And we bought big filters to put over top of them.  We also only allowed them during summer when a certain temperature was reached so depending on when your audit is then it may not be an issue for you.

Which kind of filters are you using? We are in need of some that are not so expensive.



Dr Vu

    Grade - MIFSQN

  • IFSQN Member
  • 235 posts
  • 51 thanks
18
Good

  • Canada
    Canada
  • Gender:Male
  • Location:Toronto
  • Interests:Action movies...

Posted 10 March 2020 - 09:57 PM


  • Anoop Nazeer likes this
A vu in time , saves nine

Thanked by 2 Members:
Anoop Nazeer , Lisa Nicely

Heidi_SQF

    Grade - AIFSQN

  • IFSQN Associate
  • 39 posts
  • 4 thanks
3
Neutral

  • United States
    United States
  • Gender:Female
  • Location:Springfield, Ohio USA

Posted 04 June 2020 - 01:02 PM

We are considering doing this same thing this year (2020).  Is there any additional advice this group could provide concerning how it went putting fans in the production area?  I'm greatly concerned because our SQF audit is in 12 days and it just started getting really hot on the shop floor due to the temp outside and the heat that the machinery gives off.  I wanted to draw from this group's experience.  I will conduct a risk assessment, talk to Cleaning department about adding fans to weekly cleaning and purchase of filters.


  • Padfoot likes this

Thanked by 1 Member:
Lisa Nicely

Padfoot

    Grade - MIFSQN

  • IFSQN Member
  • 97 posts
  • 6 thanks
14
Good

  • United States
    United States
  • Gender:Male
  • Location:Dallas, TX

Posted 04 June 2020 - 02:09 PM

We are considering doing this same thing this year (2020).  Is there any additional advice this group could provide concerning how it went putting fans in the production area?  I'm greatly concerned because our SQF audit is in 12 days and it just started getting really hot on the shop floor due to the temp outside and the heat that the machinery gives off.  I wanted to draw from this group's experience.  I will conduct a risk assessment, talk to Cleaning department about adding fans to weekly cleaning and purchase of filters.

We ended up adding our fans to the sanitation schedule, we have to clean them more than once a week since we are a bakery so there's always flour in the air but depending on your company you could probably do it weekly. Also when you do environmental testing check the areas where the fans will hit.


  • Heidi_SQF likes this

Thanked by 1 Member:
Heidi_SQF


Share this


Also tagged with one or more of these keywords: fans, sqf

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users