Cleaning food packaging parts

Question

Cleaning food packaging parts

Started by rosie, May 26 2010 10:40 AM

rosie

IFSQN Member

5 Replies

26 May 2010 - 10:40 AM

Hi

Does anyone know a good odourless food grade solvent suitable for degreasing and cleaning tool and machine parts used to produce pots for the food industry - oh and has to be cheap too.
Thanks
Rosie

Share this Topic

Topics you might be interested in

Cleaning & Sanitizing Bucket System Does anyone have a guide for cleaning electric plugs and cords in a bakery? Need a Specialized Tool for Cleaning Gridded Mezzanine Floors – Any Recommendations? Cleaning Aluminum Mixing Paddles – Preventing Allergen Residue Cleaning wax from candy wrappers on packaging machines

Reply to this Topic

Similar Discussion Topics

Cleaning & Sanitizing Bucket System Does anyone have a guide for cleaning electric plugs and cords in a bakery? Need a Specialized Tool for Cleaning Gridded Mezzanine Floors – Any Recommendations? Cleaning Aluminum Mixing Paddles – Preventing Allergen Residue Cleaning wax from candy wrappers on packaging machines Changeover Cleaning: FDA vs USDA and Impact on Lot Definition Verifying Correct Sanitizer and Detergent Concentrations in Cleaning Supervising vs Unsupervised Allergen Cleaning Validation Cleaning conveyor belts with sugary candy ATP Swab Failures After Cleaning Matcha Powder Lines

Amal IFSQN Active · Answer 1 · 2010-05-27T06:25:43+00:00

Hi Rosie
You can contact Premalube TM - Certified Labs
CALL TOLL-FREE at 1-800-527-9929, in USA.
Monday through Friday, 8 a.m. to 5 p.m. CST.

Regards,
Amal

Simon IFSQN Admin · Answer 2 · 2010-06-08T19:21:22+00:00

Rosie is based in the UK so a US supplier would be no good unless they have a UK distributor. Any suggestions in the UK?

cazyncymru Banned · Answer 3 · 2010-06-09T20:51:12+00:00

Hi

Does anyone know a good odourless food grade solvent suitable for degreasing and cleaning tool and machine parts used to produce pots for the food industry - oh and has to be cheap too.
Thanks
Rosie

You could try someone like CCL, or Johnson Diversey, or Holchem or Klenzan.
Their all specalist CIP / cleaning chemical companies.

If you need contact details, i cam email to you.

cazx

rosie IFSQN Member · Answer 4 · 2010-06-10T17:29:21+00:00

You could try someone like CCL, or Johnson Diversey, or Holchem or Klenzan.
Their all specalist CIP / cleaning chemical companies.

If you need contact details, i cam email to you.

cazx

Thanks Caz

I'm still researching - the problem is we need something to squirt on which evaporates off pretty quickly and this seems hard to come by. I have a few samples and most are quite lemony / citrus smelling (think the citrus extracts help with the de-greasing) - I'd prefer something odourless as I'm worried about tainting the very hot plastic which will be moulded around these parts.

kaz IFSQN Associate · Answer 5 · 2010-07-09T09:37:57+00:00

Thanks Caz

I'm still researching - the problem is we need something to squirt on which evaporates off pretty quickly and this seems hard to come by. I have a few samples and most are quite lemony / citrus smelling (think the citrus extracts help with the de-greasing) - I'd prefer something odourless as I'm worried about tainting the very hot plastic which will be moulded around these parts.

I work for a extrusion and thermoforming company, we use the following product which are all food grade approved
30-85-66Monks & Crane5ltr Janitol Deep Clean

These are M&S approved as well

55B6900ArcoBysan sanitiser 5 litre55B6901ArcoBysan sanitiser spray 750ml55B6930ArcoByocleanse glass cleaner 750ml spray

hope this helps
Kaz

Cleaning food packaging parts

rosie

Topics you might be interested in

Amal

Simon

cazyncymru

rosie

kaz

Similar Discussion Topics

About us