Seeking Recommendations for Suppliers of Reel Handling Equipment

I'm looking to source some reel handling equipment.

Like this: Large reel Lifter
The RWK I/A reel handling unit is used for lifting reels with materials which will telescope if lifted by the core alone. It pneumatically grips the reel between a mandrel in the core and a gripper on the outside diameter of the reel and also uses the pneumatics to rotate the reel through 90 degrees. The mandrel in the core can also be used to grip the core if required. The maximum safe working load is 300 kg.

and this: Small reel lifter
The RWM reel handling unit has a manually operated expanding core gripper to grip the reel and a manually operated rotate to rotate the load through 90 degrees. The maximum safe working load is 150 kg.

The above are perfect for the job, but very expensive, so I need some comparisons.

Thanks,
Simon

Dear Simon,

clicking the 1st link gives -

// Provide alternate content for browsers that do not support scripting // or for those that have scripting disabled. Alternate HTML content should be placed here. This content requires the Macromedia Flash Player. Get Flash.

I have shockwave flash if that is the same thing. I do use noscript (ffox) but 99% other websites no total block problems like above. Regrets.

Charles.C

BUMP for Simon

Dear Simon,

Tried with Opera. Video runs fine but no sound. Maybe there shouldn't be.

Looks like eventually Robots will come before the insects.

Rgds / Charles.C