Risk assessment (BRC) - Pre-requisite programs
Started by Sumudu, Jul 26 2012 06:41 PM
We do have major pre-requisite programs (Premises, Transportation and storage, equipment, Personnel, Sanitation & Pest control, Allergens and recall and SSOP). So, will we have to assess the risk which is being appeared in each bullet for the BRC V6. Pls comment on this...
Thanks in advance
Alex
Thanks in advance
Alex
Risk assessment for equipment calibration
Risk assesment for nut allergen to remove it from the system
Supplier Risk Assessment
HARA same as risk assessment for ISO?
Looking for Management of Change Procedure and Risk Template
[Ad]
We do have major pre-requisite programs (Premises, Transportation and storage, equipment, Personnel, Sanitation & Pest control, Allergens and recall and SSOP). So, will we have to assess the risk which is being appeared in each bullet for the BRC V6. Pls comment on this...
Thanks in advance
Alex
Dear Sumudu,
Pls comment on this...
Not sure what you are asking ? Please elaborate a little.
Rgds / Charles.C
1 Thank
Dear AlexWe do have major pre-requisite programs (Premises, Transportation and storage, equipment, Personnel, Sanitation & Pest control, Allergens and recall and SSOP). So, will we have to assess the risk which is being appeared in each bullet for the BRC V6. Pls comment on this...
Thanks in advance
Alex
You already have " have major pre-requisite programs " which bullet of them did you mean to start its risk assessment; what exactly you want to start discussion?
Youssef
1 Thank
Hi,
Sorry guys for the inadequate explanation. What I really want to do is risk assessment on GMP and SSOP programs. GMP program has more than 50 sub units. For instance, under pre-requisite programs, A- Premises and A.1.1.1- Outside property inspection.
So I need to clarify that, do I need to do the risk assessment for all the pre-requisite programs to fulfill the requirement of BRC V6.
Thanks again...
Sumudu
Sorry guys for the inadequate explanation. What I really want to do is risk assessment on GMP and SSOP programs. GMP program has more than 50 sub units. For instance, under pre-requisite programs, A- Premises and A.1.1.1- Outside property inspection.
So I need to clarify that, do I need to do the risk assessment for all the pre-requisite programs to fulfill the requirement of BRC V6.
Thanks again...
Sumudu
Risk assessment for equipment calibration
Risk assesment for nut allergen to remove it from the system
Supplier Risk Assessment
HARA same as risk assessment for ISO?
Looking for Management of Change Procedure and Risk Template
Is Raw Milk Safe for Consumption? Risk, Regulations & Recalls
Assessment for Production Risk Zones based on Clause 4.3.1 of BRC Issue 9
Lessons from the Martinelli Case: Importance of Supplier Risk Controls
Climate Change Risk Assessment for FSSC 22000 Packaging Producers
Cannery Risk Zoning Guidance for New Canning Facility