What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

2.8.2.1 iv. Allergen Management - Hazard?

Started by , Apr 15 2013 07:37 PM
2 Replies
Hello All,
When SQF says "hazard," are they referring to the three types of hazard (Risk Assessment)?

"2.8.2.1 iv. The hazards associated with allergens and their control incorporated into the food safety plan." Page 58.

Any help is greatly appreciated.

Sincerely,
John
Share this Topic
Topics you might be interested in
FSSC v6 equipment management purchase specification Allergen checklist to supplier New Metal Detector requirements in the food safety management system Allergen validation and verification as per FSSC Version 6.0 Allergen Specific factory wear
[Ad]
John , I think the newest ,version is on page 67 , 7.1

2.8.2 .1 iv "The hazards associated with allergens and their control incorporated into the food safety plan ".
With each allergen that is brought into your facility (raw material supplies), you should have a hazard analysis of things like, environmental impact stored like-like, highest risk stored at the bottom, air handleing systems that could carry powder to non-allergen areas, human traffic, forklift traffic, proper labeling as it arrives at your plant, room dividers , cleaning utensils separated from other non allergen utensils, rework, and not to mention breakroom snacks brought in and then an employee does not wash properlly or carries the crumbs in clothing or facial hair ,....bla bla ...pretty much a plan that includes all the other sections vii, viii, ix and on to 2.8.2.2 , 2.8.2.3 , 2.8.2.4
You will find with the SQF systems the main subject, (2.8.2) with details of what they , would like to see included under that heading .
Just make sure you can find it in your " FOOD SAFETY PLAN " .

Hope this helps Jeff
4 Thanks

John , I think the newest ,version is on page 67 , 7.1

2.8.2 .1 iv "The hazards associated with allergens and their control incorporated into the food safety plan ".
With each allergen that is brought into your facility (raw material supplies), you should have a hazard analysis of things like, environmental impact stored like-like, highest risk stored at the bottom, air handleing systems that could carry powder to non-allergen areas, human traffic, forklift traffic, proper labeling as it arrives at your plant, room dividers , cleaning utensils separated from other non allergen utensils, rework, and not to mention breakroom snacks brought in and then an employee does not wash properlly or carries the crumbs in clothing or facial hair ,....bla bla ...pretty much a plan that includes all the other sections vii, viii, ix and on to 2.8.2.2 , 2.8.2.3 , 2.8.2.4
You will find with the SQF systems the main subject, (2.8.2) with details of what they , would like to see included under that heading .
Just make sure you can find it in your " FOOD SAFETY PLAN " .

Hope this helps Jeff



Hello Jeff,
Thank you for the quick feedback. Your post explains everything. Really hope you have a great day.

Much Thanks,
John
1 Thank

Similar Discussion Topics
FSSC v6 equipment management purchase specification Allergen checklist to supplier New Metal Detector requirements in the food safety management system Allergen validation and verification as per FSSC Version 6.0 Allergen Specific factory wear Allergen declaration for gelatin? Allergen Management Allergen Management Plan SQF 2.4.3.7 - Hazard Analysis FSSC v6 2.5.6 Management of Allergens