Is stud fastening acceptable on workwear coats?

Question

Is stud fastening acceptable on workwear coats?

Started by Simon, Jan 03 2014 11:33 AM

Reply to this Topic

Simon

IFSQN Admin

7 Replies

03 January 2014 - 11:33 AM

Following the xmas excess I've kind of lost the plot and I need some advice.

Is stud fastening acceptable on workwear coats, with concealed studs except on the cuffs and top one at neck.

Are there any other better options?

Thanks in advance

Share this Topic

Topics you might be interested in

Cleaner Attending Same In House Training Refresher Every Year - Acceptable Can such Visual HACCP Flowcharts be acceptable? When Is Product Rework Acceptable? Are Hats Acceptable as Hair Restraints Under BRCGS Packaging? Cooling CCP Data Gaps Due to Logger Errors – Is Historical Data Acceptable?

Reply to this Topic

Similar Discussion Topics

Cleaner Attending Same In House Training Refresher Every Year - Acceptable Can such Visual HACCP Flowcharts be acceptable? When Is Product Rework Acceptable? Are Hats Acceptable as Hair Restraints Under BRCGS Packaging? Cooling CCP Data Gaps Due to Logger Errors – Is Historical Data Acceptable? What Are Acceptable TPC Limits for Zone 3 in RTE Cheese Plants? Acceptable Mould Levels in Air Plates – What Are the Industry Standards? Oil of Oregano as a Food Ingredient – Is It Acceptable Under Canadian Regulations? Is it acceptable to install the fly electrocutor inside the production area but only open after working hours? BRCGS-Workwear

trubertq IFSQN Principal · Answer 1 · 2014-01-03T11:57:57+00:00

I hope so..... that's what my clients use :surprise: we haven't been reprimanded for it yet,mind you we have had some other strange requests during customer audits..... but that's another story

Setanta IFSQN Fellow · Answer 2 · 2014-01-03T15:25:38+00:00

If you have a metal detector test, that the loose studs are detected on, I would say yes.

Snookie IFSQN Fellow · Answer 3 · 2014-01-03T17:26:09+00:00

Snookie

IFSQN Fellow

#4

03 January 2014 - 05:26 PM

Think they are better than plastic buttons.

Simon IFSQN Admin · Answer 4 · 2014-01-04T14:21:51+00:00

Simon

IFSQN Admin

#5

04 January 2014 - 02:21 PM

Thanks guys.

Tony-C IFSQN Fellow · Answer 5 · 2014-01-09T04:35:27+00:00

Following the xmas excess I've kind of lost the plot and I need some advice.

Is stud fastening acceptable on workwear coats, with concealed studs except on the cuffs and top one at neck.

Are there any other better options?

Thanks in advance

The main requirements of food safety standards tend to state 'no buttons' but a word of warning. I have seen clothing where studs regularly detached and were lost. If you have a metal detector they may be picked up but I would closely scrutinise the quality of the clothing and relative ease with which the studs become detached.

Regards,

Tony

Philips IFSQN Member · Answer 6 · 2014-01-13T12:39:31+00:00

Yes, we have not had any problem in the last couple of years, 13 to be precise. what is required is a system not necessary written; for checking the integrity of the studs i.e. they are intact, not torn, they are functional and all that.

Its a better infact the best option than the strings that some times dont work effectively

damiandoerfer IFSQN Associate · Answer 7 · 2014-02-27T01:02:01+00:00

damiandoerfer

IFSQN Associate

#8

27 February 2014 - 01:02 AM

studs or snaps are preferred to buttons by our auditor.

Is stud fastening acceptable on workwear coats?

Topics you might be interested in

Similar Discussion Topics

About us