Corrective action (BRC)

Hello everyone.

I recently started working with quality systems, and I have a question about the corrective actions in BRC.

When I want to correct/improve some procedure to stop a not compliance (out of an auditing), I start a corrective action. What is the scope of this correction? Should I differentiate the internal not compliance from the intern audit not compliance?

This is not a relevant question, but I have this doubt and I need to make this clear to improve our quality system in the best way.

Thank you for your attention.

Best regards,

Ana

Hello everyone.

 

I recently started working with quality systems, and I have a question about the corrective actions in BRC.

When I want to correct/improve some procedure to stop a not compliance (out of an auditing), I start a corrective action. What is the scope of this correction? Should I differentiate the internal not compliance from the intern audit not compliance?

 

This is not a relevant question, but I have this doubt and I need to make this clear to improve our quality system in the best way.

Thank you for your attention.

 

 

Best regards,

Ana

Hi anateixeira,

Thanks for yr query and Welcome to the Forum !

IMEX the scope of the correction typically extends to determining/correcting the root cause of the NC, if there is one.

Should I differentiate the internal not compliance from the intern audit not compliance?

Sorry, don't quite understand the question.

If you are comparing an external audit to an internal one, IMEX corrective actions are normally handled in a similar way.

All corrective actions are handles the same regardless of where and how they arise. Investigation, planned corrective action, responsibility, timescale, preventative action ( if necessary), root cause, verification of corrective action and then close out.