QC on Packaging (Totes and Bags)
Started by auditqa, Oct 03 2017 09:07 PM
Hello all,
Trying to find a sampling plan for the QC check on the receiving of packaging material such as totes/bags. (For example how much should I inspect when receiving 5,000 totes or so on...)
Can someone share what is commonly used as a sampling plan for packaging material?
Thank you! :)
Example HACCP Plan for Cardboard Packaging Production
New ISO 22002 Changes for Food Packaging Manufacturers
Packaging Requirements for Cookie Dough Products
Packaging Low-pH Products in Heat-Sensitive Containers
Managing body piercings in food packaging facilities
[Ad]
Hi Martins,
Hope these files are helpfull for you.
Lefteris
Attached Files
2 Thanks
Sampling plan would be more dictated by the risk you have with the packaging materials. Such as how many out of a given lot are defective or not usable, or do not pass your tests? This can give you some initial guidance on the sampling plan.
Example HACCP Plan for Cardboard Packaging Production
New ISO 22002 Changes for Food Packaging Manufacturers
Packaging Requirements for Cookie Dough Products
Packaging Low-pH Products in Heat-Sensitive Containers
Managing body piercings in food packaging facilities
Heavy Metal Testing Requirements for Packaging
Are Ziploc or other non-sterile bags OK for component-contact or product-contact?
Food Contact Packaging
Key Requirements in BRCGS Packaging Issue 7
What’s New in BRCGS Global Standard Packaging Materials Issue 7?