Do I need to re-certify and re-validate the CCP measuring equipment?
Started by Linekela, Nov 21 2017 02:36 PM
Our software that we use for Double Seam inspections got disconnected from the server and after consultation with IT and supplier, we have to make a choice to re-install the software again. The software is a visionary software that works with cameras attached to the computer. The problem was that we couldn't log on for us to conduct the measurements. Do I need to get the supplier to certify the cameras again after re-installing the software?
Stainless-steel grades for product-contact equipment
Steel-it epoxy paint for equipment product-contact surfaces
Standard Microbial Count for Equipment /Utensils in Food Industry (MEAT PRODUCTION AND VEGETABLES)
New Equipment and Commissioning Checklist Template
FSSC v6 equipment management purchase specification
[Ad]
Hi Linekela,
How can you assure that the camera is functioning with the software?
Stainless-steel grades for product-contact equipment
Steel-it epoxy paint for equipment product-contact surfaces
Standard Microbial Count for Equipment /Utensils in Food Industry (MEAT PRODUCTION AND VEGETABLES)
New Equipment and Commissioning Checklist Template
FSSC v6 equipment management purchase specification
The why, what for and how on Food Equipment & Supplies Safety Certification
The why, what for and how on Food Equipment & Supplies Safety Certification
The why, what for and how on Food Equipment & Supplies Safety Certification
COP Ancillary Equipment
(11.2.10.2) Calibrated equipment found out of calibration