What can be done to demonstrate effective cleaning validation?
Good day everyone
My client is in the low risk manufacturing but was asked by the auditor to proof validation of cleaning, she already does swabs, a complete cleaning checklist as well as testing of her chemical strength with QAC strips, any tips on what else can be done to satisfy the auditor?
Good day everyone
My client is in the low risk manufacturing but was asked by the auditor to proof validation of cleaning, she already does swabs, a complete cleaning checklist as well as testing of her chemical strength with QAC strips, any tips on what else can be done to satisfy the auditor?
Hello,
For this issue i think results of swabs before cleaning and disinfection and after is an evidence for Validation.
Hi, Smitjc.
What is the objective of cleaning? Is this the manual cleaning or is this CIP to begin with? Normally, swabs and QAC strips are for "verification". For the validation, you need first to assess the cleanbility of your line and are the equipment (including auxiliaries - gaskets, etc) are compatible with your cleaning chemicals. Then check historical data if there some issues in the line related to cleaning. Then validate for different cycles (with different personnel or shift) if each shift is doing the procedure as defined or as written. Took photos of the activity (e.g if the procedure say 3 are required, the shift should be allotted with 3 person every time or if the procedure said to dismantle some parts then it should be what is happening). Check also the cleaning implements if what are needed are all available. Check the training if they are competent and trained to perform the cleaning. All of these to be documented.
Based on what you observed then you take the swabs and QAC to "verify" its effectiveness.
Hi Smit,
Your already identified its low risk area based on the risk assessment and previous history,
As our IFSQN members mentioned maintaining the verifying records of swab tests after and before cleaning gives confidence to auditors.
Secondly conduct the environment sampling data and monitoring records gives good impression to auditors.
Also sharing or displaying the cleaning SOP of the particular place or machine its added advantage.
Regards
H.reddy
Is it swabs the only way to verify cleanliness? or to tell what you are saying you are cleaning it's really clean?
I don't do swabbing of any kind and my final audit is in December for sqf lvl 2 for food packaging (we don't handle food) we only manufacture food packaging.
The other way to verify (and is included as a method in SQF guidance) is by VISUAL INSPECTION
If you have a pre op record and SOP this should suffice
From the guidance
Auditors NEED to start reading the guidance as well
The other way to verify (and is included as a method in SQF guidance) is by VISUAL INSPECTION
If you have a pre op record and SOP this should suffice
From the guidance
11.2.13.5 Pre-operational inspections shall be conducted following cleaning and sanitation operations to ensurefood processing areas, product contact surfaces, equipment, staff amenities and sanitary facilities and otheressential areas are clean before the commencement of production. Pre-operational inspections shall beconducted by qualified personnel.Evaluation of cleaning. Monitor the effectiveness of cleaning and keep records of all inspectionsimplemented to verify the effectiveness of the cleaning programTo verify the effectiveness of sanitation, a visual pre-operational inspection of equipment and site is to beconducted prior to the start of operations, after a sanitation activity or the beginning of a shift. For high riskoperations and allergen cleaning verification (refer to 2.8.2.1), a more thorough swabbing program shall beimplemented to verify the integrity of the cleaning regime.Guidance for Developing, Documenting, Implementing,Maintaining and Auditing an SQF SystemSQF Code, Edition 8 – Module 11: Good Manufacturing Practices for Processing ofFood Products© 2017 Food Marketing Institute 30SQF Code Module 11 Guidance
Auditors NEED to start reading the guidance as well
Couldn't agree more, sometimes they just wanna keep doing the way that they have been doing without proper follow of the requirements.
Thank you Scampi!
The auditor I had tried this trick on me too...........but I had prepared by reading the guidance and referring to it during the audit. In order for any of these GFSI's to actually MEAN anything, they need to be applied evenly and equally regardless of location/auditor..
yep but the keyword for the guidance is to "verify" but the OP referred to "validation", unless the guidance pertain to the same thing.. but agree, that above are ways to "verify" effectiveness or after the cleaning. :)
From the code
Good day everyone
My client is in the low risk manufacturing but was asked by the auditor to proof validation of cleaning, she already does swabs, a complete cleaning checklist as well as testing of her chemical strength with QAC strips, any tips on what else can be done to satisfy the auditor?
Standard ??
Process ??
Product ??
I love this thread.
I have a question, though:
Does anyone do an ATP swab post-clean followed by an APC (viable swab) at each cleaning event?
This is for non-RTE lines
Thanks, Dy
We only do ATP on a weekly basis (non RTE) but no APC
It does seem very heavy handed for non RTE (but that's just my opinion)
However, when I was in poultry non RTE, ATP was done nightly, and if results were above the allowable, a reclean/reswab was done before the piece of equipment was released into production
Answers will likely vary depending on what non rte food
I love this thread.
I have a question, though:
Does anyone do an ATP swab post-clean followed by an APC (viable swab) at each cleaning event?
This is for non-RTE lines
Thanks, Dy
Hi dyne,
Each to their own but this thread unfortunately has a confusing mix of unknown / variable Standards and Materials, starting from the OP.