What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

FSSC 22000 Uniform Policy

Started by , Dec 27 2018 12:17 AM
2 Replies

Is there a specific uniform policy for the FSSC 22000 standard? Can the employees wear their uniforms outside the production areas? This question is being ask for a facility that produces plastic bags.  The employee never comes into direct contact with the food contact surface of the bag. I believe this process could be considered low risk? Thank you for taking time on reviewing this question.  Any feedback definitely appreciated.

 

 

 

Thank you.

Share this Topic
Topics you might be interested in
FSSC V6 Internal audit Checklist Do oPRPs Still Provide Value Under FSMA and FSSC? Climate Change Risk Assessment for FSSC 22000 Packaging Producers FSSC 22000 Announce the Release of FSSC Development Program V2.0 FSSC 22000 Equipment Management Procedure: Template Request
[Ad]

Hi 022514STO,

 

The requirements for protective clothing are specified in ISO/TS 22002-4:2013 Prerequisite programmes on food safety -- Part 4: Food packaging manufacturing:

 

13.4 Workwear and protective clothing

Personnel who work in or enter into production or storage areas shall wear work clothing that is fit for purpose, clean and in good condition.

Where applicable to the food safety risk, workwear shall not be used for any other purpose and shall not be stored in the same locker as personal clothing.

Workwear shall provide adequate coverage so that hair, perspiration and loose items cannot contaminate the packaging.

Where gloves are used for packaging contact, they shall be clean and in good condition.

NOTE   Use of disposable gloves or hand sanitizers is preferred.

Personal protective equipment, where required, shall be designed to prevent packaging contamination and shall be maintained in hygienic condition.

 

Kind regards,

 

Tony

Hi 022514STO,

 

The requirements for protective clothing are specified in ISO/TS 22002-4:2013 Prerequisite programmes on food safety -- Part 4: Food packaging manufacturing:

 

13.4 Workwear and protective clothing

Personnel who work in or enter into production or storage areas shall wear work clothing that is fit for purpose, clean and in good condition.

Where applicable to the food safety risk, workwear shall not be used for any other purpose and shall not be stored in the same locker as personal clothing.

Workwear shall provide adequate coverage so that hair, perspiration and loose items cannot contaminate the packaging.

Where gloves are used for packaging contact, they shall be clean and in good condition.

NOTE   Use of disposable gloves or hand sanitizers is preferred.

Personal protective equipment, where required, shall be designed to prevent packaging contamination and shall be maintained in hygienic condition.

 

Kind regards,

 

Tony

The requirement is very clear. :)


Similar Discussion Topics
FSSC V6 Internal audit Checklist Do oPRPs Still Provide Value Under FSMA and FSSC? Climate Change Risk Assessment for FSSC 22000 Packaging Producers FSSC 22000 Announce the Release of FSSC Development Program V2.0 FSSC 22000 Equipment Management Procedure: Template Request Clarifying FSSC 22000 V6 Clause 2.5.5 on Positive Testing Trends Looking for Study Materials for FSSC 22000 Version 6 Lead Auditor Exam SQF vs FSSC 22000 – Key Differences and Document Numbering Tips How to Conduct an Environmental Risk Assessment under FSSC 22000 V6.0 FSSC 22000 Additional Requirements Version 6 Section 2.5.11