What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Cleaning of Bakery Trays

Started by , Jan 29 2019 02:34 AM
7 Replies

Hello,

 

I have a visited a small line on making burger buns and to our dismay the buns tray are all blacked carbon and not clean thoroughly (small debris under the tray).

 

Some leaked that they washed at the end of the whole batch (which we doubt so) and not between use. Is this acceptable? Not washed between use and continue to make the next cycle of buns until end of shift.

 

Hope to hear some comments on this.

 

Best regards.

Share this Topic
Topics you might be interested in
Anyone have a template for the V6 Risk Based Plan for Tanker Cleaning risk assessment? Cleaning chemical discrepancies and chemical logs Cleaning of Hoses Food Manufacturing Cleaning Chemicals Foaming machines in a cleaning management system
[Ad]

What frequency does their SOP indicate they should be cleaned? If it is not being cleaned at the frequency stated then I would address it with them. If the frequency set doesn't seem to be yielding cleaner pans I'd ask how they verify the pans are deemed clean and ready for the next run.

are they lining the trays with parchment?  Those trays take a very long time to clean and usually are on a schedule that is less than daily due to the nature of them. They also have a ferrous piece that runs under the lip which are known to drip rusty water if not dried completely.

Dear Candyman,

 

Their SOPs stated that it's after "every use" and the pan looks "black" and they validate by observations only.

Do you think it's necessary to have a further method of verification.

Scampi,

 

No there is no parchment paper. 

What does their own written and documented sop state?
"Their SOPs stated that it's after "every use" and the pan looks "black" and they validate by observations only.

Do you think it's necessary to have a further method of verification."

So, they failed their own sop on thw item and their failure can result in issues for your company - issue a demand to follow their own sop and begin documented cleanings (as in they will need to write it down as done, time and sign off.)

They will need to transmit the cleaning information to you.

Followup in person will be needed.

I imagine your own supplier approval process must have something about how you go about handling infractions by suppliers so you will get to cite that against your supplier as well such as suspension, trailer loading stoppages, and full cancelation of supply agreements.
1 Like

I agree with Glenn

 

If they don't understand something as simple as following this kind of SOP, one can only imagine the other things happening

 

 

Now, I will say (having worked in a bakery) that the black stuff will become bonded to the pans overtime and is impossible (short of sand blasting) to remove it.

 

Parchment is cheap and forms a physical barrier between the pan and the food. They either (pardon the pun) clean up their act or you find another supplier. 


Similar Discussion Topics
Anyone have a template for the V6 Risk Based Plan for Tanker Cleaning risk assessment? Cleaning chemical discrepancies and chemical logs Cleaning of Hoses Food Manufacturing Cleaning Chemicals Foaming machines in a cleaning management system HQF Certification for Cleaning Stations: Elevating Hygiene and Quality Standards HQF Certification for Cleaning Stations: Elevating Hygiene and Quality Standards HQF Certification for Cleaning Stations: Elevating Hygiene and Quality Standards Water hoses and nozzles - maintenance and cleaning schedule Cleaning methods and chemicals for plastic IBCs?