What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

How many NCR's can you raise per clause if multiple problems found

Started by , Dec 11 2019 05:41 AM
3 Replies

How many NCR can you raise per clause if the requirements in that clause are in bullet points and/or more than one requirement have been stated and non are met by the company?

Share this Topic
Topics you might be interested in
SQF Clause 5.2.1 - Artwork customer approval BRCGS Storage and Distribution - Clause 1.1.9 BRCGS Clause 3.11.3 - Incident management test must include a recall test? (11.2.10.2) Calibrated equipment found out of calibration If I change the Xray Silicon 4.0 test sample to 8.0 mm will there be any problems?
[Ad]

Hi Sameer

most auditors will group all the requirements of that clause and raise one NCR to keep the no of NCR raised to minimum. Having said that auditors has discretion to raise more than on NCR if the company was found non-compliant to many requirements in the same clause.

 

Kind regards

Dr Humaid Khan

Managing Director

Halal International Services

Australia

 

1 Like1 Thank

This can depend on the severity of the NCR.  If you have many small errors under one are then they can group them but if they are critical errors that can impact the safety of the food then they may separate them.  The auditors will work with you to try and help you out but too many small issues are too many large ones, regardless of if they are all under one are or not will end up with a failure.

 

Cheers!

1 Like1 Thank

Hello

There is not an exact number, but more than 3 is suspicious and can be raised as a major NC

Best regards,

Leila

1 Like1 Thank

Similar Discussion Topics
SQF Clause 5.2.1 - Artwork customer approval BRCGS Storage and Distribution - Clause 1.1.9 BRCGS Clause 3.11.3 - Incident management test must include a recall test? (11.2.10.2) Calibrated equipment found out of calibration If I change the Xray Silicon 4.0 test sample to 8.0 mm will there be any problems? Clause 8.5.1.2 - Characteristics of raw materials, ingredients and product contact materials Listing Ingredients from multiple vendors FSSC 22000 Clause 2.5.1 - Management of Services and Purchased Materials Label for a product with multiple vendors Problems Implementing and Maintaining a Knife Control Policy