What is the best method to clean walls in a flexo printing process?
Hello,
We have a flexo printing process and all the ink area of the machine look always dirty with the ink reaching the walls, what kind of products can we use to clean the ink.
Thanks
This ink,are they water based or oil base. please try this chemical Sola bac from clover chemicals.
https://www.chemical...ricidal-cleaner.
thank you.
Blessed.
it's an oil based ink
You can contact Clover chemical which can give you a chemical which is food grade.
thank you.
Blessed.
I would get with your ink provider and machine manufacturer. It sounds like you have excessive ink "misting". It could be from the viscosity of the ink, or you might need to add a conditioner. We had the same issue with our sheet-fed offset press until we had our ink mfg reformulate. Can I ask why you're not using water based inks on your Flexo press? Water based inks are amazing now a days and aqueous coating tech is also very advanced.
Maintain a freshly painted look on your walls by keeping them free of dust and spots. Plus, preventive maintenance means less time spent scrubbing walls later.
Vacuum painted walls with a soft brush attachment. Then wipe them down with a cloth-covered broom or mop (spray with a dusting agent for best results) or use an electrostatic dusting wipe. Wipe away fingerprints and other marks soon after they appear. Avoid using an excessive amount of water when cleaning painted walls.