What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Has anyone ever requested a change to their USDA FSIS inspector?

Started by , May 11 2020 02:09 PM
3 Replies

Has anyone who has worked with FSIS inspectors ever requested to have a new inspector vs the old inspector, we are facing an issue with our current USDA inspector, this person is unfair and has it in for us despite of trying to do things right by the book

 

please advise.

 

Thank you

Share this Topic
Topics you might be interested in
USDA and pork broth If I change the Xray Silicon 4.0 test sample to 8.0 mm will there be any problems? USDA inspected products Reformulation change and use up of film USDA notification Withdrawals
[Ad]

My first thought is you have documented all of the issues they have to make sure they are targeting you? I would then try to talk to them, and if that should fail, ask to talk to the district lead.

 

Do you ever have relief inspectors? Do they find the same things as your 'troublesome' inspector? Can you talk to them? These all may be starting points. You do not want to request a new inspector without trying to fix the situation first.

1 Like

We recently were in a discussion with an inspector lead (district supervisor, etc.) and asked what the procedure should be to have an inspector replaced due a conflict, etc.

 

She said that the best way would be to first see if the situation can not be resolved (and document the discussion) without briniging her into the mix and indicate to the conflicted inspector that  you have checked with the area person to establish the basis for the discussion and what next steps would be.

 

This of course would put the conflicted inspector on notice that you have done your due diligence in seeing what the steps are prior to taking those steps if your documented conversation does not work out.

 

She indicated this as best course, because once we asked for her intervention then she needs to alert her higher up and from that I got, this is where it gets real serious real fast.

 

As it turned out our client was able to have a good conversation (documented) with the conflicted inspector and things appear to be better now.

Seriously, be sure the behavior is inappropriate and not just annoyingly strict.

 

If there is no wrongdoing, "malicious compliance" may come into effect and eliminate all of the "grey" areas of enforcement on site.

 

Glenn's approach is the best one. Have a conversation with your inspector (documented) first. You will have the high ground then if it escalates.

 

Good rule for conflict in general, give everyone the rope necessary to hang themselves before you escalate.

1 Like

Similar Discussion Topics
USDA and pork broth If I change the Xray Silicon 4.0 test sample to 8.0 mm will there be any problems? USDA inspected products Reformulation change and use up of film USDA notification Withdrawals Packaging of pre cook chicken already approved by USDA SQF 2.7.1.3 - Food Defense Plan, Challenge example requested Validation for USDA USDA Labeling Evaluation How to Change Old Habits