What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Risk assessment for environmental monitoring in cardboard packaging

Started by , Aug 17 2020 10:27 AM
3 Replies

I work for a company that produces cardboard packaging, mostly non-food and of that which is for food it is mostly not direct contact. We recently had our BRC audit and got a minor NCR for not carrying out a risk assessment for environmental monitoring requirements which I am now trying to do. I have bought a document template pack but am struggling with the risk scoring. These are the risk scores:

 

3 Death of consumer/ long term illness leading to death.
Legal requirement. The hazard frequently occurs in the industry (at least once per month) 2 Consumer in hospital or requires medical attention/ serious short term injury or illness.
Customer requirement. The hazard occurs sometimes in the industry (at least once per year) 1 Minor injury or illness to consumer or complaint The hazard rarely occurs in the industry (it hasn't happened in the last 2 years or more)

 

From the reading I have been doing I believe that cardboard is only at risk of mould, how harmful could this be on direct food contact packaging? My other question is the frequency. Is there any data available for how often there is mould on card raw material? From my own experience of being at my company for nearly 9 years it has never been an issue for us but this is the only place in the industry I have worked.

Share this Topic
Topics you might be interested in
Risk assesment for nut allergen to remove it from the system Risk assessment for equipment calibration Supplier Risk Assessment HARA same as risk assessment for ISO? Looking for Management of Change Procedure and Risk Template
[Ad]

I've just realised that the table I posted hasn't formatted properly so here is the information again for the scores:

 

3 Death of consumer/ long term illness leading to death. Legal requirement.

2 Consumer in hospital or requires medical attention/ serious short term injury or illness. Customer requirement.

1 Minor injury or illness to consumer or complaint 

 

3 The hazard frequently occurs in the industry (at least once per month)  

2 The hazard occurs sometimes in the industry (at least once per year)

1 The hazard rarely occurs in the industry (it hasn't happened in the last 2 years or more)

Hi Skyhaze,

 

It sounds like you are just about to encounter haccp for packaging ?.

 

Can have a look at these 2 slightly "wandering" threads to get some background ideas -

 

https://www.ifsqn.co...ng/#entry151317

https://www.ifsqn.co...ht/#entry145707

Thanks very much Charles, I will have a look through the threads!


Similar Discussion Topics
Risk assesment for nut allergen to remove it from the system Risk assessment for equipment calibration Supplier Risk Assessment HARA same as risk assessment for ISO? Looking for Management of Change Procedure and Risk Template Is Raw Milk Safe for Consumption? Risk, Regulations & Recalls Assessment for Production Risk Zones based on Clause 4.3.1 of BRC Issue 9 Lessons from the Martinelli Case: Importance of Supplier Risk Controls Climate Change Risk Assessment for FSSC 22000 Packaging Producers Cannery Risk Zoning Guidance for New Canning Facility