What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Testing % of Nylon In Film

Started by , Oct 13 2020 06:34 PM
3 Replies

Hi all, I am tasked to find a piece of equipment to test the percentage of Nylon in film.  Currently we are using a microscope which is a very painful, cumbersome, time consuming, and not very accurate method of finding the percentage of Nylon in the film.  Would anyone here have a recommendation on what I should research to purchase?  

Share this Topic
Topics you might be interested in
When you send samples for testing do you keep some for self-evaluation Shelf-life validation gap: HACCP says 24 months frozen, but testing only ran 4 months (beef plant) Micro Testing Limits for Hemp Seeds and Oils Reducing recall exposure from annual composite adulterant testing done post-distribution Compressed Air Testing: Is Annual Microbiological Analysis Necessary or Can the Requirement Be Removed?
[Ad]

What are typical compositions of your films? Are they laminated multilayers? 

If the film has a mix/co-polymer monolayer structure, a sophisticated method is needed such as spectroscopy, gel chromatography, calorimetry; even microscopy requires electronic types. Sending samples to an external labo looks like a good idea when the tests don't have to be frequent.

Hello beautiophile,

 

We do multi-layer (5 to 7) films.  We are needing to test Nylon layer % frequently so sending it out to an outside lab is not practical for us as results are needed in real time. 

Hi All, 

 

Just checking in to see if anyone had any additional suggestions?


Similar Discussion Topics
When you send samples for testing do you keep some for self-evaluation Shelf-life validation gap: HACCP says 24 months frozen, but testing only ran 4 months (beef plant) Micro Testing Limits for Hemp Seeds and Oils Reducing recall exposure from annual composite adulterant testing done post-distribution Compressed Air Testing: Is Annual Microbiological Analysis Necessary or Can the Requirement Be Removed? Looking for Water Testing Recommendations Metal Detector Testing When Used Only as X-Ray Backup Shelf life testing of baked goods Cooling Tank Water Testing US FDA Facility Registration for Food Testing Laboratories