What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Does FDA require allergen labeling for soy if the product tested and resulted 5 ppm for soy?

Started by , Apr 23 2021 07:20 PM
8 Replies

Hi everyone, does FDA require allergen labeling for soy if the product tested and resulted 5 ppm for soy? What is the ppm range for soy to be on the allergen labeling? Thank you.

Share this Topic
Topics you might be interested in
Looks like we're officially getting 'sesame' as a big boy allergen Allergen Control in Wholesale Total spores vs Total plate count in Sterilised product How to Label 'Natural Type Flavors' on US Product Packaging Supplier withdrawal for metal contamination, but own MDs have not detected in Finished Product
[Ad]

If it's an ingredient in the product then yes and it doesn't matter the ppm. The ppm range would help you with your allergen cleaning program.

It's also important to note that Soy Lecithin is also required to be marked as a Soy Allergen, even though it's been processed so much that it will test negative.

If it's an ingredient in the product then yes and it doesn't matter the ppm. The ppm range would help you with your allergen cleaning program.

 

To finish that first thought, if Soy is NOT an ingredient, you should probably find out where that 5ppm is coming from....

Hi everyone, does FDA require allergen labeling for soy if the product tested and resulted 5 ppm for soy? What is the ppm range for soy to be on the allergen labeling? Thank you.

 

 

Great question.  The "Big 8" allergens are a zero tolerance for any testable limits.  If it can be detected by the test you are using, then it is contaminated.  If it's in an ingredient, like soy lecithin, then it must be declared even if a test doesn't find it.  (Except for certain highly refined oils, like many soybean oils.)  There are no established 'safe' limits for the Big 8 allergens in the United States. 

 

Some sensitizers, specifically sulfites, allow a limit of <10ppm - Though they still need to be declared if they're a functional ingredient in your product.  

Thank you for all the answers and no we don’t use any ingredients that contains soybean oil or soy lechitin in our product. But from agricultural department .s random product allergen test for soy came 5 ppm. I tested other products we have and also did the swab test on the surfaces where it could be cross contact but all the soy test I had in the facility came negative. And since it is really low I was wondering if I can still call it soy free?
Thank you again

You need to dig in with your supplier on this.  It could very well be a cross contact issue at your supplier.

 

Thank you for all the answers and no we don’t use any ingredients that contains soybean oil or soy lechitin in our product. But from agricultural department .s random product allergen test for soy came 5 ppm. I tested other products we have and also did the swab test on the surfaces where it could be cross contact but all the soy test I had in the facility came negative. And since it is really low I was wondering if I can still call it soy free?
Thank you again

Do you use any wheat based ingredients? We had done an analysis of all of our raw materials with potential cross contact at the supplier level. We had 3 ingredients where soy was a potential for cross contact. We tested those ingredients at receipt and one tested positive for soy. As I started researching, the ingredient had wheat in it and there is a lot of information in regards to wheat testing positive for soy due to agriculture practices. 

 

Thank you for all the answers and no we don’t use any ingredients that contains soybean oil or soy lechitin in our product. But from agricultural department .s random product allergen test for soy came 5 ppm. I tested other products we have and also did the swab test on the surfaces where it could be cross contact but all the soy test I had in the facility came negative. And since it is really low I was wondering if I can still call it soy free?
Thank you again

Do you use any wheat based ingredients? We had done an analysis of all of our raw materials with potential cross contact at the supplier level. We had 3 ingredients where soy was a potential for cross contact. We tested those ingredients at receipt and one tested positive for soy. As I started researching, the ingredient had wheat in it and there is a lot of information in regards to wheat testing positive for soy due to agriculture practices. 

Good call. I never thought of that. I grew up on a farm and this doesn't surprise me at all.


Similar Discussion Topics
Looks like we're officially getting 'sesame' as a big boy allergen Allergen Control in Wholesale Total spores vs Total plate count in Sterilised product How to Label 'Natural Type Flavors' on US Product Packaging Supplier withdrawal for metal contamination, but own MDs have not detected in Finished Product Supervising vs Unsupervised Allergen Cleaning Validation Tell me your allergen sob stories... Does a Change in the Flow Diagram Require EMP Review? Product Recall Expert Nutrition Labeling for 640g Soup Tubs – How Many Servings?