What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Generic bleach used for cleaning

Started by , May 09 2022 12:54 PM
5 Replies

If generic bleach is used as a cleaner for certain equipment and then rinsed away with water and an approved cleaning/sanitizing solution, does the bleach still need to be diluted to <200 ppm? I am aware that as a no rinse sanitizer, this is definitely the case, but what if it is used as a cleaner and then fully rinsed. Would there need to be some swabbing done post cleaning to ensure no residues are left behind?

 

I'm unclear about the ppm requirements based on use.

 

Any help is appreciated. Thank you.

Share this Topic
Topics you might be interested in
Generic RSPO letter given to vendors and customers Animal Feed Generic HACCP plan Can we have a generic Food Safety System to comply with all compliance standards? Generic Food Safety Manual in Compliance with all Food Safety Standards Generic Food Defense Plan
[Ad]

A)  Bleach is not a detergent, unless you mean a cleaning chemical with chlorine in it?

 

B) if for no other reason than the safety of your employees----do not exceed 400 ppm on step one

 

C)  See A

To clarify, bleach would not be used alone as a cleaner, but added to a cleaning chemical to remove certain stains that are difficult to remove otherwise. 

Ah, ok

 

In the case, I would go with what the vendor suggests for concentration to be when adding the chlorine to the cleaning chemical

 

You simply need to follow the label  and/or manufacturer for uses and concentrations.           Once the cleaning step is completed, there should NOT be any free chlorine left anyway and once you've rinse your total chlorine should be zero, or close to it

 

If I were you, I would swab the equipment post clean pre rinse for TPC and then decide on a final no rinse chlorine application---some are effective down to 80ppm depending on the load left post clean

Location unknown so Regulatory unknown.

Specific Application/Primary Chemical unknown.

 

So query sort of unanswerable in a Specific way IMO.

 

I agree the generic answer in 1st line of Post 4.

It seems to like adding bleach to a cleaning chemical would not be the best idea.   First, you would need to obtain the proper documentation for the approval for the generic bleach.   Not all bleach should be used in food manufacturing.   Second, mixing chemicals is in house is generally discouraged as it could create unsafe situations.  Third, it seems like mixing could also create a situation where you are not using the chemicals as indicated on the label.  Fourth, it just seems like it would be easier to purchase a chlorinated cleaner.      


Similar Discussion Topics
Generic RSPO letter given to vendors and customers Animal Feed Generic HACCP plan Can we have a generic Food Safety System to comply with all compliance standards? Generic Food Safety Manual in Compliance with all Food Safety Standards Generic Food Defense Plan Can anyone help with a generic food defense plan? Individual FSMS for each product or a generic FSMS for the factory? Looking for a generic risk assessment to use for a BRC certified site Cleaning of Equipment using generic bleach Traceability of generic products into the supply chain