SQF 11.2.1.8 - Paint in processing area
Good afternoon,
The company I am with manufactures food additives for dairy processing. We have a dedicated room with no food contact surfaces since all manufacturing occurs within a closed system, with the exception of the inductor (sealed with its lid when not being used), which is not located near any of our problem areas. The walls in the room are a corrugated tin and hold up fairly well for about a year before we see pitting, as well as paint coming off on the catwalks and stair case handles that are metal. The room is washed down every day and that is where we see the paint coming off the handles and catwalk, from the pressure hoses. We would like to paint these to freshen it up, but wondering if we have to use a food grade paint.
11.2.1.8 states "Paint used in a food handling or processing area shall be suitable for use, in good condition, and not be used on any product contact surfaces."
I'm guessing "suitable for use" refers to food grade paint? We'd like to use a paint that can be used in a sprayer since we have a limited window between our maintenance staff's schedule and our production schedule.
I appreciate any input.
Thanks,
Jill
Don't use any paint thar can "fume off" such as an oil based paint. I'd go with a high quality epoxy.
Thank you sir!
Hi JillClark,
I recently purchased this paint for use in our plant. I have not used it yet, but it does specifically market itself as food grade!
Hi JillClark,
I recently purchased this paint for use in our plant. I have not used it yet, but it does specifically market itself as food grade!
One wonders if it's RTE also ?
Presumably analogous to food grade lubricants.
One wonders if it's RTE also ?
Presumably analogous to food grade lubricants.
When I open it I'll let you know how it tastes! :roflmao:
But yes, I'm sure what these paint manufacturer's mean is it is formulated with facility use in mind (withstands frequent cleaning and abrasion). But unlike lubricants, I am not aware of any "rating" system for paints like what lubricants have (ie H1 vs H2)
When I open it I'll let you know how it tastes! :roflmao:
But yes, I'm sure what these paint manufacturer's mean is it is formulated with facility use in mind (withstands frequent cleaning and abrasion). But unlike lubricants, I am not aware of any "rating" system for paints like what lubricants have (ie H1 vs H2)
Hi Brothbro,
This is "apparently" (I haven't further checked) an example of two possible criteria -
Fakolith FoodGrade paints and varnishes are coatings widely tested and certified for direct, indirect and occasional contact with food, beverages and drinking water, according to European regulation EU 10/2011, and/or American regulation FDA 21 CFR 175.300, and with all its subsequent modifications. Our FoodGrade paints and varnishes have the obligatory Declaration of Conformity (Compliance Declaration), and are suitable and indicated for painting, coating, renovating and protecting surfaces such as food and beverage silos, tanks, pipes, fish farms, transport elements, printed food packaging, shells and barks, as well as walls, ceilings, flooring, sandwich panel, cold stores, clean rooms, and installations and objects in general in all sectors of the food industry. In addition, the entire FoodGrade range is treated with BioFilmStop antimicrobial technology, specifically approved for food contact, and effective against bacteria and biofilm, and also coronaviru
and for "protective coatings" also (apparently) NSF, eg -
https://www.mcmaster...nsf-registered/
Detailed analysis of possible criteria here -
https://www.mychemic...ntact-safe.html
(pdf of last link added in case disappears -
food grade paints.pdf 2.84MB 33 downloads
Just because paints are for use in the food industry does not mean that they are edible.
Chipping paint will remain an issue that needs to be resolved, even with a food industry claim.
Off course you should still opt for paint which is suitable for your use/food contact, but don't let your maintenance/management think that this stuff is edible.
The amount of times I have heard that we do not need to fix the issue because it is ''food grade'' :roflmao: .
Just because paints are for use in the food industry does not mean that they are edible.
Chipping paint will remain an issue that needs to be resolved, even with a food industry claim.
Off course you should still opt for paint which is suitable for your use/food contact, but don't let your maintenance/management think that this stuff is edible.
The amount of times I have heard that we do not need to fix the issue because it is ''food grade'' :roflmao: .
Well, yes it can be so interpreted if arbitrarily classified as "Food Grade".
My facility had routine monthly promotional visits by a Sales Rep for a Food Grade Compressor Grease who brought a spoon along with him and proceeded to prove its edibility !
The visits suddenly stopped after a few months for undisclosed reasons.
Well, yes it can be so interpreted if arbitrarily classified as "Food Grade".
My facility had routine monthly promotional visits by a Sales Rep for a Food Grade Compressor Grease who brought a spoon along with him and proceeded to prove its edibility !
The visits suddenly stopped after a few months for undisclosed reasons.
Was the undisclosed reason his prolonged poisoning with compressor grease :rofl2: .
Hi Brothbro,
This is "apparently" (I haven't further checked) an example of two possible criteria -
and for "protective coatings" also (apparently) NSF, eg -
https://www.mcmaster...nsf-registered/
Detailed analysis of possible criteria here -
https://www.mychemic...ntact-safe.html
(pdf of last link added in case disappears -
Ah very interesting, Charles! The rabbit hole on paint goes deeper than I realized. Your last link at the chemicalfreehouse is an especially good one. I think the content therein could answer many of the OP's questions.