Should all gaps in production doors have a door sweep or brush?
Started by arpagano2, Sep 22 2022 05:10 PM
For facilities, should every door have a door sweep or brush to close the gap between the door and the floor? Would this be relevant to just a door that leads to the outside environment or all doors?
Assessment for Production Risk Zones based on Clause 4.3.1 of BRC Issue 9
Implementing Lot Traceability in Small-Scale Production
Production Room Layout Query: Accessing Cold Room via Changing Area
Correct sequence for putting on clean attire before entering a production room
Technical Guidance for Factory-Scale Tempeh Production Under BRCGS
[Ad]
We have sweeps only on the doors, leading outside, and cooler ones (to prevent temperature rise).
agree with Olenazh
That is great. I had a feeling, but wanted to verify. Thank you both
We have USDA and FDA inspections regularly and they only check the outside doors for the sweeps. They can be brushes or the foam/rubber. Them and a certified pest control program. Interior doors would only need seals if you are moving from a clean room to a production room.
Cheers!
Assessment for Production Risk Zones based on Clause 4.3.1 of BRC Issue 9
Implementing Lot Traceability in Small-Scale Production
Production Room Layout Query: Accessing Cold Room via Changing Area
Correct sequence for putting on clean attire before entering a production room
Technical Guidance for Factory-Scale Tempeh Production Under BRCGS
Controlling Mycotoxins in Production
Best Cutting Tools for Solid Frozen Food Blocks in Production
Defining CCPs vs. Preventive Controls in Non-Alcoholic Beverage Production
Cleaning Before and After Production – Is It Mandatory?
Best production plan for allergen contamination prevention