What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

How to control garbage in pilot scale room (R&D Department)?

Started by , Feb 03 2023 10:24 AM
3 Replies

Hi All...

 

I wanna ask you, 

How we can manage the garbage in the hygiene area?

 

I think there are no rules about "no garbage" in hygiene area (especially in my case is on the pilot scale area for R&D Dept,)

Is there any rules regarding garbage management in food safety? ( i think it will refer to cross-contamination and pest )

 

 

Any advice will help

 

Thanks

Share this Topic
Topics you might be interested in
Allergen Control in Wholesale SQF control for 'knives and cutting' instruments Implementing Lot Traceability in Small-Scale Production What to Include in a Master Label Control Log Production Room Layout Query: Accessing Cold Room via Changing Area
[Ad]

These two things come immediately to mind:

Garbage needs to be removed from the area at least daily (more if the bin fills up more quickly). 

Bins need to be foot-operated to avoid cross-contamination on employees' hands.

1 Thank

Hi RafifUtamaPutra, 

 

Similar to above, you need sanitary garbage bins with covers and preferably foot operation. The bins need to be on a sanitation schedule for daily emptying. The area itself should be free from garbage and debris, instead all debris should be placed into the garbage bins. Garbage should be placed in bins immediately upon generation, rather than littered on the floor until a sanitation worker picks it up.

 

Across all food safety standards, you will likely see that they ask that garbage be disposed of in adequate disposal bins in such a way that does not pose significant risk of contaminating food. This could be understood to mean that garbage bins themselves must be of sanitary design, in working condition, and emptied regularly.

1 Thank

These two things come immediately to mind:

Garbage needs to be removed from the area at least daily (more if the bin fills up more quickly). 

Bins need to be foot-operated to avoid cross-contamination on employees' hands.

 

Hi RafifUtamaPutra, 

 

Similar to above, you need sanitary garbage bins with covers and preferably foot operation. The bins need to be on a sanitation schedule for daily emptying. The area itself should be free from garbage and debris, instead all debris should be placed into the garbage bins. Garbage should be placed in bins immediately upon generation, rather than littered on the floor until a sanitation worker picks it up.

 

Across all food safety standards, you will likely see that they ask that garbage be disposed of in adequate disposal bins in such a way that does not pose significant risk of contaminating food. This could be understood to mean that garbage bins themselves must be of sanitary design, in working condition, and emptied regularly.

 

Hi SHQuality and Brothbro,

 

 

Thank you for your answer and explanation, I also thought the same thing as you mentioned

 

So, as long as we can control this garbage so that it doesn't become a contamination source, and I think its OK.

 

I guess I'm worrying too much about this hahaha...

 

 

Thanks,

Best regard


Similar Discussion Topics
Allergen Control in Wholesale SQF control for 'knives and cutting' instruments Implementing Lot Traceability in Small-Scale Production What to Include in a Master Label Control Log Production Room Layout Query: Accessing Cold Room via Changing Area Correct sequence for putting on clean attire before entering a production room Technical Guidance for Factory-Scale Tempeh Production Under BRCGS Alternatives to Strip Curtains for Pest Control Does anyone have a procedure for pest control? Using pH as a Critical Control Point (CCP) for Listeria Control