BRC Audit
Did you look at the code they referenced? SQF has similar code but also says:
All exceptions shall meet regulatory and customer requirements and shall be subject to a risk assessment and evidence of ongoing risk management.
If BRC has wording allowing an exception, you need to follow what it says. If BRC does NOT have wording for exceptions, I think you're going to have to update your GMP to align with the FSQ scheme you're under.
Do you have the interpretation guideline? I don't for the packaging standard but for the food standard which is normally aligned, it appears that there is some leeway where products are fully enclosed.
The only problem you might have though is if you have shared entry and exit areas as then it's not fully separate but if your warehouse is accessed differently then you might be able to argue that. Although why didn't you when the auditor was still on site? Now it feels a little late and you will probably struggle to have that non con removed.
Do you have the interpretation guideline? I don't for the packaging standard but for the food standard which is normally aligned, it appears that there is some leeway where products are fully enclosed.
The only problem you might have though is if you have shared entry and exit areas as then it's not fully separate but if your warehouse is accessed differently then you might be able to argue that. Although why didn't you when the auditor was still on site? Now it feels a little late and you will probably struggle to have that non con removed.
The first two paragraphs of interpretation for BRCGS 6.2.1:
Sites must document a risk assessment to show it has considered the risk of product contamination from personnel practices dependent on the hazards posed to the intended use of the finished product. For example sites manufacturing products that are going to be used for food, feed, beverages, cosmetics, hygiene sensitive or pharmaceutical products are likely to require more stringent rules regarding personal hygiene than sites producing products for non-food or hygiene sensitive product contact.
This clause is designed to ensure that personal items are not a source of product contamination – for example, small parts falling off and becoming foreign-body hazards, or a source of microbiological or allergen cross-contamination/cross contact. Items previously worn in an area that was contaminated could transfer the contaminant into manufacturing or storage areas. Clear guidance must be given to all personnel on site regarding the hygiene requirements and what can and cannot be worn in the relevant areas. The site may choose to enforce requirements in addition to those stated in the Standard.
I saw in OP: Our GMP currently states that jewelry is only prohibited when handling food labels and packaging.
I thought it should have been where. Like GMO, I still don't know well the context to object the auditor's NC.