What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Verification Plan (7.8)

Started by , Aug 06 2014 10:53 AM
8 Replies

I am a newcomer in this forum. I would like to know if it's possible doesn't make a general verification plan (7.8) if part of this information is already included at the end of each document (Plan HACCP, PRP and OPRP ) in form of efficacy verification. For example, in case of water quality control, as evidence of verification, would be enough with the report of several microbiological analysis signed by a member of the food safety team? each document specifies who, when, and how the efficacy is measured

Thanks and regards

Share this Topic
Topics you might be interested in
Allergen validation and verification as per FSSC Version 6.0 Verification & Validation - scheduling, methods, etc. What kind of Verification is required for Maintenance and Sanitation? Validation and Verification: Ensuring Compliance and Excellence Validation and Verification: Ensuring Compliance and Excellence
[Ad]

I am a newcomer in this forum. I would like to know if it's possible doesn't make a general verification plan (7.8) if part of this information is already included at the end of each document (Plan HACCP, PRP and OPRP ) in form of efficacy verification. For example, in case of water quality control, as evidence of verification, would be enough with the report of several microbiological analysis signed by a member of the food safety team? each document specifies who, when, and how the efficacy is measured

Thanks and regards

 

Hi FerranFlo,

 

:welcome:

 

If you already verify Procedures, PRPs, OPRPs & HACCP Plans then there is no need to duplicate but I would draw up a summary document/table of your verification activities. This will make it clear to everyone (including your auditor) how you are complying with clause 7.8.

 

Regards,

 

Tony

1 Like

thank you so much for your answer

regards

 

Ferran

Hi

I'm a new member, i working in seafood factory, i dontn know 7.8 and 8.2 ISO 22000. Help me, if possible you can send example foe me. Thanks

Hi

I'm a new member, i working in seafood factory, i dontn know 7.8 and 8.2 ISO 22000. Help me, if possible you can send example foe me. Thanks

 

Hi Kahnhgm,

 

:welcome:

 

Clause 7.8 Verification planning
An example would be verification based on testing of end products, you have a sample plan that checks the level of hazard which is being controlled and results confirm the hazard is absent or at an acceptable level.

Clause 8.2 Validation of control measure combinations
This is not the same as verification, quoting from ISO 22004:
Validation is an assessment prior to operation, the role of which is to demonstrate that individual (or a combination of) control measures are capable of achieving the intended level of control.
Verification is an assessment carried out during and after the operation, the role of which is to demonstrate that the intended level of control has actually been achieved.

The validation usually includes such activities as
a) reference to validations carried out by others, to scientific literature, or to historical knowledge,
b) experimental trials to simulate process conditions,
c) biological, chemical and physical hazard data collected during normal operating conditions,
d) statistically designed surveys,
e) mathematical modelling, and
f) use of a guide approved by competent authorities.

 

Regards,

 

Tony

1 Thank

Thanks Tony

Hi Kahnhgm,

 

:welcome:

 

Clause 7.8 Verification planning
An example would be verification based on testing of end products, you have a sample plan that checks the level of hazard which is being controlled and results confirm the hazard is absent or at an acceptable level.

Clause 8.2 Validation of control measure combinations
This is not the same as verification, quoting from ISO 22004:
Validation is an assessment prior to operation, the role of which is to demonstrate that individual (or a combination of) control measures are capable of achieving the intended level of control.
Verification is an assessment carried out during and after the operation, the role of which is to demonstrate that the intended level of control has actually been achieved.

The validation usually includes such activities as
a) reference to validations carried out by others, to scientific literature, or to historical knowledge,
b) experimental trials to simulate process conditions,
c) biological, chemical and physical hazard data collected during normal operating conditions,
d) statistically designed surveys,
e) mathematical modelling, and
f) use of a guide approved by competent authorities.

 

Regards,

 

Tony

Dear Tony,

Could you please give me  table of what to do to fulfill Verification plan in ISO 22000?

Thanks and best regards

Dear Akool18,

 

You can refer to this attached file. It is too general example of verification activities.

 

 

Hope it will you.

 

 

Attached Files

3 Thanks

Dear Akool18,

 

You can refer to this attached file. It is too general example of verification activities.

 

 

Hope it will you.

Thank you so much for your help Ati.


Similar Discussion Topics
Allergen validation and verification as per FSSC Version 6.0 Verification & Validation - scheduling, methods, etc. What kind of Verification is required for Maintenance and Sanitation? Validation and Verification: Ensuring Compliance and Excellence Validation and Verification: Ensuring Compliance and Excellence Validation and Verification: Ensuring Compliance and Excellence PRP Verification Activities X-ray monitoring and verification Metal Detector Frequency and Verification Validation and Verification of a CIP system