Record to verify and validate the metal detector as a CCP

can someone please assist me with a record to verify and validate the metal detector as a CCP.

can someone please assist me with a record to verify and validate the metal detector as a CCP.

Dear Benito,

Do you mean a copy of a form ? If so, i don’t have one but i can give you an example of the posssible data required. The corresponding form would be quite simple. (But see the following caveats) -

There may be some terminology confusion -

(1) Validation and verification are both dependent on definition. Sometimes they are used interchangeably or in particular ways.

(2) From a CCP's  POV it is more usual to validate / verify the critical limits  ??

(3) It is also possible to validate / verify the metal detector’s functionality, eg sensitivity, eg –

http://www.ifsqn.com...nds/#entry68807

(This is also sometimes referred to as [a part of] “calibration” although the latter term may also be seen utilised in activities like “annual calibration”, or  [inevitably] “annual validation”).

As an example oriented to (2) but which in practice typically overlaps (3), see Step 15 in the last (section 10) of -

HACCP, Generic Model_ Spices, cfia.pdf   264.91KB   365 downloads

If above not what you wanted, please revert / clarify.

Rgds / Charles.C

HI CHARLES,

Actually this is what i wanted,

thanks a lot charles, :clap:

BENITO.